Pneumatic And Hydraulic Equipment Page 964

Mounting CGT4 Table 1 - DIMENSIONS AFFECTED BY ROD DIAMETER Table 2 - DIMENSIONS NOT AFFECTED BY ROD DIAMETER Bore MM In. Rod V W Y ZL ZM 1.500 0.625 0.25 0.63 2.00 6.69 6.88 1.000 0.50 1.00 2.38 7.06 7.63 2.000 1.000 0.25 0.75 2.38 7.45 7.63 1.375 0.38 1.00 2.63 7.70 8.13 2.500 1.000 0.25 0.75 2.38 7.57 7.75 1.375 0.38 1.00 2.63 7.82 8.25 1.750 0.50 1.25 2.88 8.07 8.75 3.250 1.375 0.25 0.88 2.75 8.85 9.00 1.750 0.38 1.13 3.00 9.10 9.50 2.000 0.38 1.25 3.13 9.22 9.75 4.000 1.750 0.25 1.00 3.00 9.47 9.75 2.000 0.25 1.13 3.13 9.60 10.00 2.500 0.38 1.38 3.38 9.85 10.50 5.000 2.000 0.25 1.13 3.13 10.38 10.50 2.500 0.38 1.38 3.38 10.63 11.00 3.000 0.38 1.38 3.38 10.63 11.00 3.500 0.38 1.38 3.38 10.63 11.00 6.000 2.500 0.63 1.63 3.50 11.77 11.88 3.000 0.63 1.63 3.50 11.77 11.88 3.500 0.63 1.63 3.50 11.77 11.88 4.000 0.50 1.50 3.50 11.77 11.88 Double rod end cylinders are available in every mounting style except MP1, MP5. For dimensions on specific mounting styles, consult the page showing the required mounting. On cylinders where the rod ends are not the same, be sure to specify where each rod end is located in relation to the mounting requirements. Note that bore sizes 1-1/2"-6" have square retainers, the same square size as the head on both ends. One of these retainers is held in place by the tie rod nuts, and therefore cannot be removed without loosening the tie rods. PRESSURE RATINGS FOR DOUBLE ROD END Cushion Rod Bore Rod end or Cushion Size Size Non-Cushion Both Ends Remarks 0.625 1,500 psi 750 psi 1.500 1.000 3,000 psi 3,000 psi 1.000 2,250 psi 800 psi 2.000 1.375 3,000 psi 3,000 psi 1.000 1,300 psi None Non-Cush Ext. 2.500 1.375 3,000 psi 3,000 psi 1.750 3,000 psi 3,000 psi 1.375 1,500 psi 1,000 psi 3.250 1.750 3,000 psi 3,000 psi 2.000 3,000 psi 3,000 psi 1.750 2,000 psi 1,300 psi 4.000 2.000 3,000 psi 2,000 psi 2.500 3,000 psi 3,000 psi 2.000 1,300 psi 1,000 psi 2.500 3,000 psi 3,000 psi 5.000 3.000 3,000 psi 1,250 psi 3.500 3,000 psi 3,000 psi 2.500 1,300 psi 750 psi 3.000 3,000 psi 2,250 psi 6.000 3.500 2,250 psi 1,000 psi 4.000 3,000 psi 3,000 psi Consult JHF where 3,000 psi rating must be maintained. CGT4 Bore SAE In. E F G J K P R EE LD 1.500 2.50 0.38 1.75 1.50 0.33 2.88 1.63 7/8-14 5.63 2.000 3.00 0.63 1.75 1.50 0.44 2.88 2.06 7/8-14 6.13 2.500 3.50 0.63 1.75 1.50 0.44 3.00 2.56 7/8-14 6.25 3.250 4.50 0.75 2.00 1.75 0.55 3.50 3.25 1-1/16-12 7.25 4.000 5.00 0.88 2.00 1.75 0.55 3.75 3.81 1-1/16-12 7.75 5.000 6.50 0.88 2.00 1.75 0.77 4.25 4.94 1-1/16-12 8.25 6.000 7.50 1.00 2.25 2.25 0.85 4.88 5.72 1-5/16-12 9.38 Rexroth pneumatics (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 964 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page