Pneumatic And Hydraulic Equipment Page 963

R E X R O T H Dimensions MX0, MX1, MX2, MX3 Tie Rod and Flange Mounts are basically the same except that the tie rods are extended and used to mount the cylinder. To prevent misalignment, sagging or binding of the cylinder when long strokes are required, the free end of the cylinder should be supported. For thrust load applications, blind or cap end tie rod extensions are best. For tension load applications, rod or head end tie rod extensions are best. Tie rod mounts are suited for many applications, however, it should be noted that they are not as rigid as the flange mountings. Notes: The bearing retainer plate is the same as the "E" dimension for 1-1/2"-6" bore sizes and the "RD" dimension for the 7"-8" bore sizes. Table 1 - DIMENSIONS AFFECTED BY ROD DIAMETER Bore DD SAE Port In. AA BB THD E EE F G J K LB P 1.500 2.30 1.38 0.38-24 2.50 -10 0.38 1.75 1.50 0.33 5.00 2.88 2.000 2.90 1.81 0.50-20 3.00 -10 0.63 1.75 1.50 0.44 5.25 2.88 2.500 3.60 1.81 0.50-20 3.50 -10 0.63 1.75 1.50 0.44 5.38 3.00 3.250 4.60 2.31 0.63-18 4.50 -12 0.75 2.00 1.75 0.55 6.25 3.50 4.000 5.40 2.31 0.63-18 5.00 -12 0.88 2.00 1.75 0.55 6.63 3.75 5.000 7.00 3.19 0.88-14 6.50 -12 0.88 2.00 1.75 0.77 7.13 4.25 6.000 8.10 3.63 1.00-14 7.50 -16 1.00 2.25 0.85 8.38 4.88 7.000 9.30 4.13 1.13-12 8.50 -20 - 2.75 0.95 9.50 5.50 8.000 10.60 4.50 1.25-12 9.50 -24 - 3.00 1.05 10.50 6.25 Table 2 - DIMENSIONS NOT AFFECTED BY ROD DIAMETER Bore MM In. Rod V W Y ZB RD RT ZJ 1.500 0.625 0.25 0.63 2.00 6.06 - - 5.63 1.000 0.50 1.00 2.38 6.43 - - 6.00 2.000 1.000 0.25 0.75 2.38 6.57 - - 6.00 1.375 0.38 1.00 2.63 6.82 - - 6.25 2.500 1.000 0.25 0.75 2.38 6.70 - - 6.13 1.375 0.38 1.00 2.63 6.95 - - 6.38 1.750 0.50 1.25 2.88 7.20 - - 6.63 3.250 1.375 0.25 0.88 2.75 7.85 - - 7.13 1.750 0.38 1.13 3.00 8.10 - - 7.38 2.000 0.38 1.25 3.13 8.22 - - 7.50 4.000 1.750 0.25 1.00 3.00 8.35 - - 7.63 2.000 0.25 1.13 3.13 8.48 - - 7.75 2.500 0.38 1.38 3.38 8.73 - - 8.00 5.000 2.000 0.25 1.13 3.13 9.26 - - 8.25 2.500 0.38 1.38 3.38 9.51 - - 8.50 3.000 0.38 1.38 3.38 9.51 - - 8.50 3.500 0.38 1.38 3.38 9.51 - - 8.50 6.000 2.500 0.25 1.25 3.50 10.77 - - 9.63 3.000 0.25 1.25 3.50 10.77 - - 9.63 3.500 0.25 1.25 3.50 10.77 - - 9.63 4.000 0.25 1.25 3.50 10.77 - - 9.63 7.000 3.000 0.63 1.25 3.75 12.00 5.25 .63 10.75 3.500 0.63 1.25 3.75 12.00 5.75 .63 10.75 4.000 0.50 1.25 3.75 12.00 6.50 .75 10.75 4.500 0.50 1.25 3.75 12.00 6.50 .75 10.75 5.000 0.25 1.25 3.75 12.00 7.75 1.00 10.75 8.000 3.500 0.63 1.25 3.88 13.25 5.75 .63 11.75 4.000 0.50 1.25 3.88 13.25 6.50 .75 11.75 4.500 0.50 1.25 3.88 13.25 7.00 .75 11.75 5.000 0.25 1.25 3.88 13.25 7.25 1.00 11.75 5.500 0.25 1.25 3.88 13.25 8.25 1.00 11.75 "RT" dimension replaces "F" dimension on 7"-8" bore sizes Rexroth Bosch JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 963 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page