Pneumatic And Hydraulic Equipment Page 958

Dimensions MT1, MT2 Table 1 - DIMENSIONS AFFECTED BY ROD DIAMETER Bore MM In. Rod V W Y RD RT XG XJ ZB ZJ 1.500 0.625 0.25 0.63 2.00 - - 1.88 4.88 6.06 5.63 1.000 0.50 1.00 2.38 - - 2.25 5.25 6.43 6.00 2.000 1.000 0.25 0.75 2.38 - - 2.25 5.25 6.57 6.00 1.375 0.38 1.00 2.63 - - 2.50 5.50 6.82 6.25 2.500 1.000 0.25 0.75 2.38 - - 2.25 5.38 6.70 6.13 1.375 0.38 1.00 2.63 - - 2.50 5.63 6.95 6.38 1.750 0.50 1.25 2.88 - - 2.75 5.88 7.20 6.63 3.250 1.375 0.25 0.88 2.75 - - 2.63 6.25 7.85 7.13 1.750 0.38 1.13 3.00 - - 2.88 6.50 8.10 7.38 2.000 0.38 1.25 3.13 - - 3.00 6.63 8.22 7.50 4.000 1.750 0.25 1.00 3.00 - - 2.88 6.75 8.35 7.63 2.000 0.25 1.13 3.13 - - 3.00 6.88 8.48 7.75 2.500 0.38 1.38 3.38 - - 3.25 7.13 8.73 8.00 5.000 2.000 0.25 1.13 3.13 - - 3.00 7.38 9.26 8.25 2.500 0.38 1.38 3.38 - - 3.25 7.63 9.51 8.50 3.000 0.38 1.38 3.38 - - 3.25 7.63 9.51 8.50 3.500 0.38 1.38 3.38 - - 3.25 7.63 9.51 8.50 6.000 2.500 0.25 1.25 3.50 - - 3.38 8.38 10.77 9.63 3.000 0.25 1.25 3.50 - - 3.38 8.38 10.77 9.63 3.500 0.25 1.25 3.50 - - 3.38 8.38 10.77 9.63 4.000 0.25 1.25 3.50 - - 3.38 8.38 10.77 9.63 7.000 3.000 0.63 1.63 3.75 5.250 .63 3.63 9.38 12.00 10.75 3.500 0.63 1.63 3.75 5.750 .63 3.63 9.38 12.00 10.75 4.000 0.50 1.50 3.75 6.500 .75 3.63 9.38 12.00 10.75 4.500 0.50 1.50 3.75 6.500 .75 3.63 9.38 12.00 10.75 5.000 0.25 1.25 3.75 7.750 1.00 3.63 9.38 12.00 10.75 8.000 3.500 0.63 1.63 3.88 5.750 .63 3.75 10.25 13.25 11.75 4.000 0.50 1.50 3.88 6.500 .75 3.75 10.25 13.25 11.75 4.500 0.50 1.50 3.88 7.000 .75 3.75 10.25 13.25 11.75 5.000 0.25 1.25 3.88 7.250 1.00 3.75 10.25 13.25 11.75 5.500 0.25 1.25 3.88 8.250 1.00 3.75 10.25 13.25 11.75 Table 2 - DIMENSIONS NOT AFFECTED BY ROD DIAMETER "RT" dimension replaces "F" dimension on 7"-8" bore sizes Bore SAE Port In. E EE F G J K LB P TD TL UT 1.500 2.50 -10 0.38 1.75 1.50 0.33 5.00 2.88 1.000 1.00 4.50 2.000 3.00 -10 0.63 1.75 1.50 0.44 5.25 2.88 1.375 1.38 5.75 2.500 3.50 -10 0.63 1.75 1.50 0.44 5.38 3.00 1.375 1.38 6.25 3.250 4.50 -12 0.75 2.00 1.75 0.55 6.25 3.50 1.750 1.75 8.00 4.000 5.00 -12 0.88 2.00 1.75 0.55 6.63 3.75 1.750 1.75 8.50 5.000 6.50 -12 0.88 2.00 1.75 0.77 7.13 4.25 1.750 1.75 10.00 6.000 7.50 -16 1.00 2.25 0.85 8.38 4.88 2.000 2.00 11.50 7.000 8.50 -20 - 2.75 0.95 9.50 5.50 2.500 2.50 13.50 8.000 9.50 -24 - 3.00 1.05 10.50 6.25 3.000 3.00 15.50 All trunnion mount cylinders need a provision on both ends for pivoting. These types of cylinders are designed to carry shear loads and the trunnion and pivot pins should be carried by bearings that are rigidly held and closely fit for the entire length of the pin. The bearing retainer plate is the same as the "E" dimension for 1-1/2"- 6" bore sizes and the "RD" dimension for the 7"-8" bore sizes. CDT4 MT1 CDT4 MT2 Rexroth hydraulics (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 958 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page