Pneumatic And Hydraulic Equipment Page 954

Mounting MS2, MS4 The side or lug mounted cylinder provides a fairly rigid mount. These type mounts can tolerate a slight amount of misalignment when the cylinder is at full stroke, but as the piston moves toward the blind end, the tolerance for misalignment decreases. It is important to note that if the cylinder is used properly, the mounting bolts are either in simple shear or tension without any compound stresses. An extended key plate option is available to eliminate the need for fitted bolts or external keys to carry the thrust load. Note: When specifying an MS2 mount with ports in the 2 or 4 quandrant, be sure to see that sufficient clearance between the port fitting and the lug is available to insert a bolt or cap screw into the lug. CDT4 MS2 CDT4 MS4 Rexroth hydraulics (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 954 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page