Pneumatic And Hydraulic Equipment Page 952

Dimensions MF1, MF2, MF5, MF6 Table 1 - MAXIMUM PRESSURE RATING FOR FLANGE MOUNTED CYLINDERS Bore Rod Push Pull Size Dia. MF1* MF2* 1.500 0.625 2,500 3,000 1.000 1,500 3,000 2.000 1.000 2,500 3,000 1.375 1,500 3,000 2.500 1.000 2,500 3,000 1.375 1,900 3,000 1.750 1,500 3,000 3.250 1.375 2,500 3,000 1.750 2,100 3,000 2.000 1,500 3,000 4.000 1.750 2,500 3,000 2.000 1,800 3,000 2.500 1,500 3,000 5.000 2.000 2,200 2,000 2.500 1,650 2,500 3.000 1,200 2,800 3.500 1,750 3,000 6.000 2.500 1,800 2,000 3.000 1,450 2,500 3.500 1,100 2,800 4.000 1,750 3,000 7.000 3.000 3.500 Order Order 4.000 ME5 ME6 4.500 Mount Mount 5.000 8.000 3.500 4.000 Order Order 4.500 ME5 ME6 5.000 Mount Mount 5.500 *Maximum pressure rating for MF1 Push applications *Maximum pressure rating for MF2 Pull applications Flange mounts are one of the strongest, most rigid methods of mounting. With this type of mount, there is little allowance for misalignment, so when long strokes are required, the free end opposite the mounting should be supported to prevent sagging and possible binding of the cylinder. Blind end mounts are best in a thrust load application and rod end mounts are best in tension applications. If an application exceeds the rectangular flange rating, a solid head or cap flange mount ME5 or ME6 is available. When a less rigid mount can be used and the cylinder can be attached to a panel or bulkhead, an extended tie rod mount could be considered. Notes: The bearing retainer plate is the same as the "E" dimension for 1-1/2"-6" bore sizes and the "RD" dimension for the 7"-8" bore sizes. Removable bearing retainer is not available in the 1-1/2"-6" bore sizes. Mounting MF1, MF2, MF5, MF6 CDT4 MF1 CDT4 MF2 CDT4 MF5 CDT4 MF6 Rexroth hydraulics (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 952 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page