Pneumatic And Hydraulic Equipment Page 907

VANE PUMPS Flows from 7.6 gpm to 75.8 gpm in single pumps Available in combination with themselves, gear pumps and Bosch radial piston pumps Through-drive horsepower transfer is 100% to the second pump Both VPV and SV are available with through shaft versions for "quick combinations" Continuous speeds from 1200 to 1800 rpm Overall efficiencies to 88% A variety of fluids can be used in addition to mineral oil. Water glycol, phosphate ester and environmentally friendly fluids can be applied with factory approval. Controls include standard pressure compensation, remote pressure compensation, load sense, solenoid 2-pressure, solenoid vented, proportional pressure control and torque limiting. GEAR PUMPS Flows from 1.85 gpm to 10.38 gpm Pressures to 3625 psi continuous Continuous speeds from 500 to 3500 rpm Overall efficiencies from 85 to 92% Pump bodies built from extruded aluminum with cast iron end covers form a very high strength unit DU bearings are standard ensuring long life HYDRAULIC PUMPS AXIAL PISTON PUMPS Rexroth Variable Volume Piston Pumps provide a wide range of flows and pressures. Flows from 4.75 gpm to 66.5 gpm Pressures to 4000 psi Continuous speeds to 3600 rpm Low noise levels Fast response times FIXED VANE PUMPS Rexroth Fixed Volume Vane Pumps Flows from 8.5 gpm to 91 gpm Pressures to 3000 psi Continuous speeds to 2700 rpm Interchanges with Vickers Replaceable Pump Cartridges Long bearing life R E X R O T H Rexroth Bosch JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j 907 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page