Pneumatic And Hydraulic Equipment Page 816

Magnetically operated, non-contact sensing system. Consists of a magnet in the piston, and a sensing switch clamped on the cylinder tie rod. One or more switches may be mounted to provide an indication of piston position or to control or initiate any sequence function. Adjustable mounting brackets allow for switches to be securely positioned anywhere along the range of piston travel. LED indicator light facilitates installation and troubleshooting. Mounting brackets standard with switches. Specifications *Metal Oxide Varsitor Surge Suppression. NOTE: All CS8 Series Switches are supplied with 9 foot leads. Switch & Mounting Bracket Dimensions Switch Model CS8-2-04 Reed CS8-2-31 Solid State CS8-2-32 Solid State Bore Sizes 1-1/2" thru 2-1/2" Switch Type Reed Switch Solid State & Light, Solid State & Light, *MOV & Light Sourcing PNP Sinking NPN Function SPST Normally Open Normally Open Switching Voltage 5-120 VDC/VAC 6-24 VDC 6-24 VDC 50/60 Hz Switching Current .5 Amp Max .5 Amp Max .005 Amp Min Switching Power 10 VA 12 Watts Max Max Voltage Drop 3.5 Volts .5 Volts Magnetic Sensitivity 85 Gauss 85 Gauss Enclosure Classification NEMA 6 & CSA Approved Temperature Range -22F to +176F -22F to +176F -22F to +176F Wiring Diagrams CS8-2 Series NOTE: 1-1/2" to 2-1/2" bore steel cylinder is supplied with an aluminum tube as standard. If a 3-1/4" to 12" bore steel cylinder requires switches, the aluminum tube and magnetic piston options must be selected. NFPA AIR CYLINDERS Series A & EA, J & EJ Cylinder Switches Switches for 1-1/2" to 2-1/2" Bore Cylinders Norgren pneumatics (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 816 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page