Pneumatic And Hydraulic Equipment Page 77

B I M B A MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS 17 o -NR $32.35 BASE PRICE Add $4.75 per inch of stroke Single Acting - Non-rotating Hexagon Rod - Spring Return - Front Nose Mounting Standard Stroke Lengths: 1/2", 1" , 1-1/2", 2" , 2-1/2", 3", 4" Maximum Stroke - 6" Optional Stainless Steel Rod Optional Accessory: D-241 Mounting Bracket Base Weight: .45 Adder Per Inch of Stroke: .22 17 o $29.40 BASE PRICE Add $4.75 per inch of stroke Single Acting - Spring Return - Front Nose Mounting Standard Stroke Lengths: 1/2", 1", 1-1/2", 2", 2-1/2", 3", 4" Maximum Stroke - 6" Optional Stainless Steel Rod Optional Accessory: D-241 Mounting Bracket Base Weight: .44 Adder Per Inch of Stroke: .22 ORIGINAL LINE-1-1/2" BORE AIR CYLINDERS OPTIONS: NO CHARGE: PORTS ROTATED (K)* *Front port rotated 90 on BF models. NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add .19" to nose mount overall length and DNR; BF and BFT add .38" PIVOT BUSHING (Y) .375" ID (use D-620-1 pivot bracket) SINGLE AND REVERSE ACTING BUMPERS (B) $3.65 additional Add .125" to overall length DOUBLE ACTING BUMPERS (B) $5.70 additional Add .125 to overall length EXTRA EXTENSION (EE) Single, reverse and double acting, add $1.60 per inch of extension DXDE, add $2.30 per inch of extension; extension added to each end DXDE hollow rod, add $2.45 per inch of extension; extension added to each end HEAVY SPRINGS (H) are standard on all single acting block front and block rear mount, and all reverse acting and stroke adjust models. For all other single acting, add $2.55 Spring Force: 8.5 lbs. relaxed-17 lbs. compressed MAGNET (prefix M)-Add $16.15 Single and reverse acting add .125" to overall length, Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4)-add $3.35 per track. LOW TEMPERATURE (N) Temperature Range: -40 to 200F Single acting add $1.50 Reverse acting add $1.90 Double acting add $2.85 DXDE add $3.50 HIGH TEMPERATURE "U" CUPS (V) Temperature Range: 0 to 400F Single acting add $6.50 Double acting add $16.15 DXDE add $20.65 Reverse acting add $11.15 ROD WIPER (W) (not available in standard single acting) (now available in block mount) Double acting, add $3.20 DXDE, add $6.70 STAINLESS STEEL ROD (prefix SR) Add $3.45 Standard on DX, DXDE, DXDEH, DNR, DXNR, All block mounts, and M option DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add $12.90 to base price + $1.85 to stroke adders LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add $20.30 Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Optional - Bronze Rod Guide Bushing Standard Force Exerted Approximately 1.7 of Air Line Pressure Enclosed Spring Force: 7 lbs. Relaxed - 14 lbs. Compressed Rod Wipers Available on D, DP, DX, DXDE, and DXDEH Models o Enter Stroke Length as 3rd Digit (Stock strokes shown as bold) Bimba JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 77 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page