Pneumatic And Hydraulic Equipment Page 767

N O R G R E N RIGHT ANGLE FLOW CONTROLS 360 rotation of the banjo body around the bolt allows for ideal positioning of tubing. Low profile and reduced physical size provide space saving installations. Tapered adjustment needles with large adjustment ranges provide linear flows and greater precision. Knurled adjustment knobs (w/screwdriver slot) and lock nuts provide fingertip adjustment. Direct mounting of flow controls on pneumatic actuators minimizes the adjustment problems encountered due to the compressibility of air in long tubing runs between the actuator and control valving. Operation Flow Controls are checked adjustable controls of the meter out type. Compressed air passes freely into the push-in fitting portion of the flow control, flowing past the check seal and entering the connected component. In reverse flow conditions, air passes back into the flow control and energizes the check seal. Air must now flow through the metered passage controlled by the tapered adjustment needle of the flow control, and finally exits through the push-in fitting end. A Tube B K L O.D. NPT Part No. Price D Hex H Adj. 10-32 12-VA0-0210 $36.15 1.04 - 1.51 0.12 5/32" 1/8 12-VA0-0218 $38.00 0.87 9/16" 2.09 0.12 1/8 12-VA0-0418 $22.42 0.91 9/16" 2.09 0.12 1/4" 1/4 12-VA0-0428 $37.10 1.00 11/16" 2.64 0.24 1/4 12-VA0-0628 $33.11 1.24 11/16" 2.64 0.24 3/8" 3/8 12-VA0-0638 $55.35 1.28 3/4" 3.07 0.24 1/2" 1/2" 12-VA0-0748 $74.10 1.50 7/8" 3.66 0.28 A Tube ISO R K L O.D. Thread Part No. Price D Hex H Adj. 4 1/8 10-TA0-0418 $33.02 22.0 14 2.09 3 1/8 10-TA0-0618 $43.75 23.0 14 2.09 3 6 1/4 10-TA0-0628 $57.60 25.5 17 2.64 6 1/4 10-TA0-0828 $58.90 27.0 17 2.64 6 8 3/8 10-TA0-0838 $75.35 28.0 19 3.07 6 1/4 10-TA0-1028 $78.10 31.5 17 2.64 6 10 3/8 10-TA0-1038 $78.15 32.5 19 3.07 6 VA0 Series Dimensions in Inches Specifications Fluid: Compressed air. Working Pressure: 5 to 150 psig Temperature Range: 0 to 175F Materials of Construction Banjo bolt, collet, adjustment knob and lock nut: Nickel plated brass Tapered adjusting needle: Brass Banjo Body: Thermoplastic O-rings and check-seal: Silicone free Nitrile Sealing washer: Thermoplastic (ISO G and 10-32 UNF) Tubing: Nylon 11 or 12, 95 durometer polyurethane. Thread Sealant: Thread sealant is applied to the full circumference of tapered male threads. norgren pneumatics JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 767 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page