Pneumatic And Hydraulic Equipment Page 727

Technical Data Fluids: Filtered and lubricated compressed air. Main valve inlet pressure range: 30 to 150 psig Operating temperature: -20 to 120F. Average flow factor (C v ): In-Out Ports: 3.2 Out-Exhaust Ports: 5.3 Response times: 11 ms at 90 psig Maximum diameter of customer supplied padlock shackle: 5/16" Exhaust port: 1/2-14 PTF Duty: Continuous at 90% to 105% of rated voltage. Coil Type: Molded with three pin plug-in connector. Enclosure Classification: NEMA 1, NEMA 4 and IP 65. Connector Plug: Cable grip for cables 1/4" to 5/16" in diameter. Electrical connectors conform to Industry Standard Form B for Three-Pin Electrical Plug Connectors, 11 mm spacing. Override: Manual, nonlocking Installation 3-Port/2-Position Type Normally Closed Price Modular P74C-NAD-PJA $360.05 P74C-NAD-P * A Standard 7.5 Watt Coils L = 24 VAC K = 240 VAC Q = 12 VDC P = 24 VDC J = 120 VAC EXCELON design allows in-line or modular installation with other 73 and 74 Series products. Inlet and outlet ports are not threaded. High-flow, spring return 3-port/2-position, normally closed solenoid operated poppet valve. Combination lockout and quick exhaust valve. Equipped with a manually operated lockout slide that can be locked only in the closed position with a customer supplied padlock. Slide handle colored yellow for easy identification as a lockout valve. Standard internal pilot supply requires a main valve inlet pressure of 30 to 150 psig, although momentary drops below 30 psig are allowed by a check valve in the internal pilot passage. Short stroke, positive sealing, cushioned poppets for long service life. 3-Port/2-Position Normally Closed Operation 3-Port/2-Position Lock Out Valves Materials Body: Zinc Pistons, Poppets: Aluminum Elastomers: Nitrile Operator Housing: PPS Plastic Operator Base: Aluminum Plunger & Spring: Stainless Steel 3-Port/2-position Solenoid Operated Valves with Lockout P74 DIRECTIONAL CONTROL VALVES N O R G R E N norgren pneumatics JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j 727 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page