Pneumatic And Hydraulic Equipment Page 707

Flow sensor design (except 10-028 and 10-076) provides a nearly constant oil/air ratio over a wide air flow range. Tamper resistant device can be installed on oil-feed adjustment to resist unauthorized adjustment. All around (360) visibility of the sight-feed dome simplifies installation and adjustment. Optional 1-quart reservoir available on the L74. The optional 2- and 5-gallon reservoirs used on the L17 lubricator are rated to ASME Pressure Vessel Code, Section VIII. Can be filled under pressure, except for optional bidirectional models and models with 2- and 5-gallon reservoirs. Port Recommended Std Metal Reservoir Transparent Reservoir Size Flow Range* Rsvr. With Drain and Sight Glass With Drain Type PTF scfm Size Part No. Price Part No. Price L72C 1/4 1.0 to 36 1.9-oz L72C-2AP-QDN $52.85 L72C-2AP-QTN $45.90 3/8 1.0 to 36 1.9-oz. L72C-3AP-QDN $54.60 L72C-3AP-QTN $47.60 L73C 1/4 3.0 to 60 3.5-oz L73C-2AP-QDN $72.95 L73C-2AP-QTN $65.95 3/8 3.0 to 60 3.5-oz L73C-3AP-QDN $72.95 L73C-3AP-QTN $65.95 1/2 3.0 to 60 3.5-oz L73C-4AP-QDN $74.65 L73C-4AP-QTN $67.60 L74C 3/8 2.5 to 40 7-oz L74C-3AP-QDN $89.85 L74C-3AP-QPN** $85.45 1/2 3.5 to 100 7-oz L74C-4AP-QDN $89.85 L74C-4AP-QPN** $85.45 3/4 3.5 to 100 7-oz L74C-6AP-QDN $89.85 L74C-6AP-QPN** $85.45 L17 3/4 8.0 to 160 1-qt. L17-600-OPDA $169.75 - 1 8.0 to 275 1-qt. L17-800-OPDA $169.75 - 1-1/4 8.0 to 275 1-qt. L17-A00-OPDA $198.65 - 1-1/2 8.0 to 275 1-qt. L17-B00-OPDA $228.50 - 10-028 1-1/2 110 to 590 1-qt. 10-028-545 $1,214.35 - 1-1/2 110 to 590 2-gal. 10-028-047 $3,170.35 - 1-1/2 110 to 590 5-gal. 10-028-048 $4,487.00 - 10-076 2 250 to 1000 2-gal. 10-076-004 $2,424.90 - 2 250 to 1000 5-gal. 10-076-005 $4,377.70 - *At 90 psig inlet pressure and 7 psid. **L74 Lubricators include a metal guard with transparent reservoirs OIL-FOG LUBRICATORS 10-028 L17 L74 L72/L73 Note Do not use L17, L72, L73, L74 lubricators, and the 10-028 lubricator downstream of frequently cycling directional control valves. Use the optional bidirectional Oil-Fog Lubricator for such conditions. Tamper resistant Plastic Sight Feed Wall Mounting device for standard DomeGreen QuickFill Cap Type Bracket Price sight feed dome Price Service Kits Price Oil-Fog Price Part No. Price L72 4224-50 $10.50 4050-89 $8.40 4382-500 $8.40 4055-51 $16.50 NA L73 4424-50 $9.80 4050-89 $8.40 4055-51 $16.50 18-011-024 $14.65 L74 4324-50 $12.95 2117-01 $8.45 4382-700 $7.55 5055-55 $47.85 18-011-024 $14.65 L17 (3/4" & 1" Ports) 6212-50 $67.25 2117-01 $8.45 5771-02 $8.45 5055-55 $47.85 18-011-021 $21.00 L17 (1-1/4" &1-1/2" Ports) 6212-51 $82.90 2117-01 $8.45 5771-02 $8.45 5055-55 $47.85 18-011-021 $21.00 10-028 & 10-076 (with 2 gal rsvr.) 3035-06 $10.80 4055-51 $16.50 18-011-021 $21.00 Accessories Fill Plug with 1/8" Tapped Hole - L17: Add -8L to end of desired model number. Bidirectional Lubricators - L17: Use E in 8th position L74: Use E in 7th position N O R G R E N Norgren JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 707 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page