Pneumatic And Hydraulic Equipment Page 648

PS POLYSEP OIL/WATER SEPARATOR Envronmentally sound, reliable and easy to maintain, PolySep Oil Water Separators remove the broadest range of coolants from compressor condensate. Staying Clean by Going Green Compressor systems produce large amounts of condensate. This condensate contains lubricant contaminants that should be disposed of properly. Ingersoll Rand PolySep Oil Water Separators can help your company be strong stewards of the environment while reducing your annual waste removal costs. When properly installed and sized, the PolySep separators are capable of providing condensate discharge levels as low as 15 mg/l. Our separtors feature non-corrosive materials and do not require electrical power for operation, further reducing environmental burdens. Advanced Media Separation Technology The PolySep Oil Water Separators utilize a proprietary specially-coated Zeolite adsorption media which separates and permanently adsorbs virtually all lubricants including polyglycols, the most difficult lubricant to separate. Competitive systems simply can't handle polyglycols without requiring expensive oversized separators.The easy to remove modules make replacement simple, and only need to be replaced once a year or after 4,000 hours of operation. Larger systems also includes a flow divider that automatically manages condensate volume for multiple units. Benefits Non-corrosive materials Permanently absorbs oils Extended filter life No electricity Only two moving parts Low maintenance costs Expandable system Valuable for ISO 14001 Helps protect and certified companies maintain the environment Maximum Max. Max. Max. Water Water Absorbed Oil Replacement SCFM Max Flow Volume Lubricant Condensate Outlet Adsorption Dimensions Model CCN# (Note 1) HP (gal./hr.) (gal.) (lbs.) Inlet NPT NPT Modules W xL x H (in.) PSG-7 38456992 60 15 0.55 1 3 1/2" 1/2" 38457008 21h x 12 dia. PSG-15 38339040 175 40 3.1 15 11 1/2" 3/4" 38339057 27 x 19 x 30 PSG-30 38465605 390 75 6.9 30 21 1/2" 3/4" 38465712 34 x 21 x 39 PSG-60 38465621 750 150 12.4 60 43 1/2" 3/4" 38465761 35 x 31 x 39 PSG-90 38465639 950 250 18.6 90 64 1/2" 3/4" 38469052 35 x 31 x 45 PSG-120 38465647 1500 350 24.8 120 85 1/2" 3/4" (2) 38465761 72 x 31 x 39 PSG-180 38465654 1900 450 37.2 180 128 1/2" 3/4" (2) 38469052 72 x 31 x 45 Flow 22204432 N/A N/A N/A N/A 1/2" N/A 40"h x 12" diam. Divider (Note 2) Technical Specifications Guide Note 1: SCFM rating depends on the type of lubricant being used. Before ordering, please contact JHF to verify the unit is properly sized. Note: 2 This component balances load between multiple PolySep units, maximizing element life and optimizing operation. Ingersoll Rand (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 648 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page