Pneumatic And Hydraulic Equipment Page 64

MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS 09 o $16.35 BASE PRICE Add $3.25 per inch of stroke Single Acting - Spring Return - Front Nose Mounting Standard Stroke Lengths: 1/2", 1", 1-1/2", 2" , 2-1/2", 3", 4" Maximum Stroke - 6" Optional Stainless Steel Rod Optional Accessory: D-129 Mounting Bracket Base Weight: .23 Adder Per Inch of Stroke: .11 09 o -NR $19.20 BASE PRICE Add $3.25 per inch of stroke Single Acting - Non-rotating Hexagon Rod - Spring Return - Front Nose Mounting Standard Stroke Lengths: 1/2", 1", 1-1/2", 2" , 2-1/2", 3", 4" Maximum Stroke - 6" Optional Stainless Steel Rod Optional Accessory: D-129 Mounting Bracket Base Weight: .25 Adder Per Inch of Stroke: .12 ORIGINAL LINE-1-1/16" BORE AIR CYLINDERS OPTIONS: NO CHARGE: PORTS ROTATED (K)* * Front port rotated 90 on BF-090-D. NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add .25" to nose mount overall length PIVOT BUSHING (Y) .250" ID SINGLE AND REVERSE ACTING BUMPER (B) $3.40 additional Add .125 to overall length DOUBLE ACTING BUMPERS (B) $4.80 additional Add .125 to overall length Models DXDE and DXDEH add .500 *Front port rotated 90 on BF-090-D. EXTRA EXTENSION (EE) Single, reverse and double acting, add $1.05 per inch of extension DXDE, add $1.25 per inch of extension; extension added to each end DXDE hollow rod, add $1.95 per inch of extension; extension added to each end HEAVY SPRINGS (H) are standard on all single acting block front and block rear mount and -NRLSC models, and reverse acting except -RA type. For all other single acting, add $2.15 Spring Force: 6 lbs. relaxed - 12 lbs. compressed MAGNET (prefix M) - Add $13.45 Single acting and DXDE add .125" to overall length Use bumper length adder for DXDE and DXDEH when magnet and bumper are ordered together. Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4)-add $3.35 per track. LOW TEMPERATURE (N) Temperature Range: -40 to 200F Single acting add $1.10 Reverse acting add $1.50 Double acting add $2.15 DXDE add $2.85 HIGH TEMPERATURE "U" CUPS (V) Temperature Range: 0 to 400F Single acting add $6.20 Double acting add $14.65 DXDE add $18.55 Reverse acting add $9.60 ROD WIPER (W) (not available in standard single acting. Now available in block mount) Double acting, add $3.35 DXDE, add $6.70 STAINLESS STEEL ROD (prefix SR) Add$2.40 Standard on DX, DXDE, DXDEH. All block mountings and M option DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add $9.05 to base price + $1.20 to stroke adder LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add $15.85 Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option - Bronze Rod Guide Bushing Standard Force Exerted Approximately 0.9 of Air Line Pressure Enclosed Spring Force: 3 lbs. Relaxed - 6 lbs. Compressed Rod Wipers Available on D, DP, DX and DXDE Models o Enter Stroke Length as 3rd Digit (Stock strokes shown as bold) Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 64 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page