Pneumatic And Hydraulic Equipment Page 639

Basic twin tower design dryer with drying in one tower and regeneration in the other (20% purge air required) High tensile extruded aluminum construction with Alocrom and epoxy painting to prevent corrosion Activated alumina desiccant (factory filled) NEMA 4/IP-66 enclosure in accordance with ASME, PED, CSA, UL and CRN standards Built-in high-efficiency filtration to deliver optimum air quality and easy maintenance. (Filters shipped loose on models D41M and above) SCFM @ 40F Inlet/Outlet Maximum Dimensions Model # Dewpoint Connection Pressure W x D x H (in.) Weight (lbs) D5IM 3 3/8" 175 11.4 x 5.9 x 16.6 24 D14IM 8 3/8" 175 11.4 x 5.9 x 24.2 35 D25IM 15 3/8" 175 11.4 x 5.9 x 35.7 51 D34IM 20 3/8" 175 11.4 x 5.9 x 43.2 62 D41IM 24 1/2" 232 11.2 x 11.9 x 32.9 70 D54IM 32 1/2" 232 11.2 x 11.9 x 39.5 81 D71IM 42 1/2" 232 11.2 x 11.9 x 46.0 92 D90IM 53 1/2" 232 11.2 x 11.9 x 52.5 103 D110IM 65 1/2" 232 11.2 x 11.9 x 59.0 114 D150IM 88 1" 189 8.7 x 22.3 x 56.4 132 D180IM 106 1" 189 8.7 x 22.3 x 56.4 184 D221IM 130 1" 189 8.7 x 22.3 x 62.9 198 D299IM 176 1" 189 8.7 x 22.3 x 72.7 229 Capacity is based on 95F/35C inlet temp. and 100 psig/7 barg inlet pressure Capacitybasispressuredewpointof-40F/C Maximum inlet temperature is 122F (50C) - correction factor needs to be applied for off design conditions Nominal purge rate at design condition is 20% of inlet flow Minimum operating pressure is 58 psig (4 barg) Options: -100F dewpoint MODULAR DESICCANT AIR DRYERS I N G E R S O L R A N D Ingersoll Rand JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 639 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page