Pneumatic And Hydraulic Equipment Page 610

HYDAC ELECTRONICS CS 1000 Series Contamination Sensor The CS 1000 Contamination Sensor is the newest HYDAC development for continuous measurement of solid contamination of fluids on the market. Using the latest technology and materials, the CS 1000 is a reliable measuring instrument that is permanently mounted on your mobile or industrial equipment. The attractive cost-to-performance ratio makes it especially interesting for OEM applications. Online, real-time condition monitoring allows you to have total predictive maintenance. Features Version with or without display Display with pivot-function Display with 6-digit ISO Code (optional) Measurement of solid particle contamination in hydraulic and lubricating fluids Compact and rugged design Type of protection IP67 Max. pressure 4350 psi (300 bar) Max. viscosity 4635 SUS Voltage supply 9-36VDC, Residual Ripple <10% Data output 4-20mA or 0-10 VDC Self-diagnosis Continuously with error indication via status LED Measuring range Display up to class ISO 7/6/5 to 28/27/26 Calibration within the range ISO 13/11/10 to 23/21/18 Contamination code ISO 4406 : 1999 SAE AS 4059 (D) Operation pressure 4350 psi (300 bar) max Connectors Inlet Thread G 1/4, ISO 228 Outlet Thread G 1/4, ISO 228 Sensor flow rate 30-300 ml/min (300 ml = ~10 oz) Permissible viscosity range 15 - 4635 SUS (1-1000 mm2/s) Fluid temperature range 32 to 185F (0 to 85C) Power consumption 3 Watt maximum Electrical specification 4 to 20 mA output: Max. 330 0 to 10 V output: Min. 820 Max. current 1.5 A Electrical outputs Analog Interfaces 4 to 20 mA (max 330 ); 0 to 10 VDC (min 820 ) Limit Switching Output Passive, n-switching power MOSFET, max current 1.5A RS485 2 conductor cable Ambient temperature range -22 to 176F (-30 to 80C) Seal Material Hydraulic/Mineral Oil Fluoro-elastomer (FPM) Phosphate Ester Ethylene Propylene (EPDM) IP class IP67 Model Code Description Part No. Price CS1220-A-0-0-0-0/-000 4-20mA Electronic Display Model 03236362 $2,175.00 CS1210-A-0-0-0-0/-000 4-20mA Non-Display Model 03240458 $1,725.00 Connection Cable 6.5 Foot 03281220 $190.00 CS1220-A-0-0-0-1/-K 4-20mA Display Model w/ CS Block Kit w/o AS Sensor 02087348 $2,545.00 CS1220-A-0-0-0-1/-KAS 4-20mA Display Model w/ CS Block Kit with AS Sensor 02086855 $3,060.00 Technical Details We do not guarantee the accuracy or completeness of this information. The information is based on average working condition. For exceptional operating conditions please contact our technical department. All details are subject to technical changes. AS 1000 Series Aqua Sensor The AS 1000 AquaSensors are water and temperature sensors used for the continuous monitoring of hydraulic and lubrication fluids - accurately, continuously, and on line. They measure the water content relative to the saturation concentration (saturation point) and output the degree of saturation (saturation level) in the range of 0 to 100% as a 4-20 mA signal. The special capacitance sensor used in the AS, absorbs water molecules from the fluid and changes its capacity value that is directly related to the saturation level in the fluid. An on-sensor integrated thermo element is measuring the temperature of the fluid in the range of 25 to 100C. When used with the HDA 5500 Microprocessor Display, a system can be put in place to detect, warn, and remove the harmful water. Input data Measuring range (temperature) -13 to 212F Measuring range (saturation level) 0 to 100% Operating pressure max. 725 psi (50 bar) Burst pressure > 9000 psi (630 bar) Parts in contact with fluid Stainless steel, FPM seal, ceramic with evaporated metal Output data - Humidity measurement Ouput level (saturation level) 4 to 20 mA Calibrated accuracy 2% FS max. Accuracy in media measurements 3% FS typ. Pressure dependent + 0.02% FS / bar Output data - Temperature measurement Output signal (temperature) 4 to 20 mA Accuracy 2% B.F.S.L. Nominal temperature range (measuring saturation level) 32 to 194F Ambient temperature range -40 to 212F Fluid temperature range -40 to 257F Viscosity range 32 to 23175 SUS Flow velocity < 16 ft/sec Permissible fluids Fluids based on mineral oil and synthetic and natural esthers Type of Protection acc. DIN 40050 IP67 Other data Supply voltage 12 to 32 V DC Residual ripple 5% Mechanical connection G 3/8 BSPP male thread Torque rating approx. 18 ft/lbs Electrical connection Pin 1: +Ub Pin 2: Signal saturation level M12x1.5 pole Pin 3: 0V / GND (DIN VDE 0627) Pin 4: Signal temperature Pin 5: not connected Reverse polarity protection of the supply voltage, excess voltage, Standard override and short circuit protection Model Code Description Part No. Price AS1008-C-000 Aqua Sensor for Mineral Based Fluid 00909109 $660.00 Technical Details Hydac (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 610 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page