Pneumatic And Hydraulic Equipment Page 607

H Y D A C DIAGNOSTICS HDA 4000 HSI Pressure Transducer The HDA 4000 HSI series is designed to provide exceptional durability and accuracy in demanding applications. They are part of a new plug and play, self-identifying sensor line. By using the HSI sensors, the user can be guaranteed accurate ranges and units when used with HYDAC's hand held diagnostic units. HSI sensors must be used with the HMG 500 and will facilitate easy use with the HMG 3000. Pressure Description Range (psi) Part No. Price HDA 4748-H-0009-000 -15 to 130 00909429 $595.00 HDA 4748-H-0016-000 0-230 00909425 $595.00 HDA 4748-H-0100-000 0-1450 00909426 $595.00 HDA 4748-H-0250-000 0-3600 00909337 $595.00 HDA 4748-H-0400-000 0-5800 00909427 $595.00 HDA 4748-H-0600-000 0-8700 00909428 $595.00 Output Data Signal output HSI, automatic recognition through HMG 500 or HMG 3000 Accuracy (B.F.S.L.) including linearity, hysterisis, and repeatability 0.25% B.F.S.L. Temperature compensation zero point 0.0045%FS/Ftyp. 0.0085%FS/Fmax. Temperature compensation over range 0.0045%FS/Ftyp. 0.0085%FS/Fmax. Linearity at max. setting to DIN 16086 0.3% FS max. Hysteresis 0.1% FS max. Repeatability 0.05% FS Long term drift 0.1% FS / year Rise time approx. 0.1 ms Technical Details Description Flow GPM Part No. Price EVS 3100-H-1 1.6 to 15.9 00909293 $1,852.00 EVS 3100-H-2 10.6 to 159 00909403 $2,079.00 EVS 3100-H-3 4.0 to 79.3 00909404 $2,184.00 EVS 3100-H-5 0.3 to 5.3 00909405 $2,022.00 EVS 3110-H-1 1.6 to 15.9 00909406 $3,282.00 EVS 3110-H-2 10.6 to 159 00909407 $3,509.00 EVS 3110-H-3 4.0 to 79.3 00909408 $3,623.00 EVS 3110-H-5 0.3 to 5.3 00909409 $3,453.00 EVS 3100 HSI Flow Rate Sensors The EVS 3100 HSI series flow rate sensors are designed to accurately measure the flow-through volume of fluids in hydraulic systems. The unit uses a stainless steel turbine wheel internal to the construction, which converts the media flow into a 4 to 20mA output signal. The in-line mounting design allows for most accurate and up to date flow measurements. The EVS 3100 HSI series also offer two additional hydraulic ports to accommodate additional sensors, ex. temperature and pressure transducers. The design of the flow meter incorporates a lightweight aluminum housing with accurate and stable measuring elements. They are part of a new plug and play, self-identifying sensor line. By using the HSI flow sensors, the user can be guaranteed accurate ranges and units when used with HYDAC's hand held diagnostic units. HSI sensors must be used with the HMG 500 and will facilitate easy use with the HMG 3000. Housing material - EVS 3100, EVS 3110 Aluminum, Stainless Steel Measurement medium - EVS 3100 Hydraulic oils* EVS 3110 Water, hydraulic oils* Supply Voltage from HMG 500 or HMG 3000 Signal Output HSI, automatic recognition through HMG 500 or HMG 3000 Temperature of Fluid -4 to 194F (-20 to 90C) Ambient Temperature -4 to 158F (-20 to 70C) Viscosity Range 1 to 100 cSt Calibrated at - EVS 3100 30 cSt EVS 3110 5 cSt Accuracy Class 2% of the actual value Electrical Connection ZBE 30-02 sensor cable M12x1 (2m) ZBE 30-05 sensor cable M12x1 (5m) Measuring Ranges** / Operating Pressure EVS 31X0-1 1.6 to 15.9 gpm / 5800 psi EVS 31X0-2 10.6 to 159 gpm / 4567 psi EVS 31X0-3 4 to 79.3 gpm / 5800 psi EVS 31X0-5 0.26 to 5.28 gpm / 5800psi Technical Details ETS 4000 HSI Temperature Transducers The ETS 4000 HSI series is designed to provide exceptional durability and accuracy in demanding applications. They are used to convert hydraulic or pneumatic temperature into an electrical output signal linearly proportional to the input temperature. They are part of a new plug and play, self-identifying sensor line. By using the HSI sensors, the user can be guaranteed accurate ranges and units when used with HYDAC's hand held diagnostic units. HSI sensors must be used with the HMG 500 and will facilitate easy use with the HMG 3000. Input Datas Sensor principle Silicon semi-conductor element Measurement range -13 to 212F (-25 to 100C) Pressure resistance 600 bar Overload pressure 900 bar Mechanical connection G 1/4 A DIN 3852 Torque rating 20 Nm Parts in contact with media stainless steel, FPM seal Output Datas Signal output HSI, automatic recognition through HMG 500 or HMG 3000 Accuracy 1.5% FS typ. Rise time t 63 15 s Other Datas Supply voltage from HMG 500 or HMG 3000 Electrical connection ZBE 30-02 sensor cable M12x1 (2m) ZBE 30-05 sensor cable M12x1 (5m) Technical Details Temperature Description Range Part No. Price ETS 4548-H-000 -13 to 212F 00909298 $442.00 *other fluids on request, **other ranges on request Hydac JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 607 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page