Pneumatic And Hydraulic Equipment Page 447

TYPE ONE WAY SHUT-OFF Socket is valved, shutting off supply line at disconnect. Plug is unvalved, exhausting downstream line at disconnect. Install socket on pressure side of line. OPERATION MANUAL Socket sleeve must be manually retracted to connect and disconnect. AUTOMATIC Inserting the plug into the socket automatically retracts the sleeve to connect. Manually retract the sleeve to disconnect. SAFETY To connect, insert plug and pull sleeve forward. To disconnect, push sleeve back while rotating first counter clockwise and then clockwise. As sleeve goes black, supply line is shut off, downstream line is exhausted, and plug is released. Remove plug. INTERCHANGEABILITY- Standard industrial interchange design, most widely used in industry. 3 and 5 Series Automatic comply with A-A-59439 (formerly MIL-C-4109F). WORKING PRESSURE 300 PSI; Vacuum to 26" Hg (connected) FLOW AIR FLOW-CFM WATER FLOW 100 PSIG 80 PSIG GPM-60 PSIG PRESSURE DROP 10 PSIG 5 PSIG 10 PSIG 5 PSIG 10 PSIG 5 PSIG 2 SERIES 16 12 14 11 1.8 1.2 3 SERIES 36 26 33 24 3.7 2.5 4 SERIES 68 50 62 45 6.8 5.0 5 SERIES 118 90 107 82 11.0 8.0 6 SERIES 190 135 172 122 22.0 16.0 OPTIONS BL Locks manual socket against accidental disconnect. To connect, align ball with slot. After connection, rotate sleeve to lock. To disconnect, realign ball with slot and retract sleeve. To order, prefix BL to socket number. SL Locks automatic socket against accidental disconnect. To connect, align notch with slot. After connection, rotate sleeve to lock. To disconnect, realign notch with slot and retract sleeve. Available FM 3, 4, 5 Series. To order, change FM prefix to SL. BALL CHECK PLUG Eliminates hose whip at disconnect by checking the rapid flow of downstream exhaust air. SWIVEL PLUGS Free swivel under pressure. Eliminates hose twist on end drop applications such as blow guns, air tools, etc. DIMENSIONAL DATA Full size layouts are available upon request FEATURES MANUAL Lowest cost, general purpose coupler Positive locking mechanism 65% more ball retention Precision leakproof seal Heavy steel sleeve. AUTOMATIC Long wearing pin type locking mechanism with greater plug contact One piece sleeve with rear crimp Precision leakproof seal One hand operation. SAFETY 100% safety Connect and disconnect at "O" pressure Plug is securely locked before air is turned on Downstream line is exhausted before plug is released, completely eliminating hose whip Tested to 100,000 operations with no leakage Special lubrication eliminates dry breakaway Can be used as 3-Way on-off valve without disconnecting. APPLICATION AND ORDERING INFORMATION SERVICE CONSTRUCTION SEAL COMPOUND TEMPERATURE TO ORDER Air Brass & Steel Buna-N -40 o to +225 o F Part No. Water w/416 S/S Valve Brass & S/S Buna-N -40 o to +100 o F Suffix W Water w/303 S/S Valve Brass & S/S Buna-N -40 o to +100 o F Suffix W303 Steam Brass & S/S Ethylene Propylene -40 o to +325 o F Suffix S Heat Brass & Steel Viton -40 o to +400 o F Suffix H Grease & Oil Brass & Steel Buna-N -40 o to +225 o F Part No. Vacuum Brass & Steel Buna-N -40 o to +225 o F Part No. Less Valve Brass & Steel Buna-N -40 o to +225 o F Suffix LV NOTE: Temperatures shown are seal compatable, consult factory for operational characteristics. Sockets other than standard are color identified: Water (Blue) Steam (Black) Heat (Red) SPARE PARTS WASHER VALVE SPRING PART NO. PRICE PART NO. PRICE PART NO. PRICE 2 SERIES W2-2* $0.81 V2-2+ q $1.62 VS2-2 $0.16 3 SERIES W3-3* m $1.00 V3-3 q $4.00 VS3-3 $0.20 4 SERIES W4-4* $1.00 V4-4+ $6.00 VS4-4 $0.20 5 SERIES W5-5* $1.00 V5-5+ $7.00 VS5-5 $0.30 6 SERIES W6-6* $1.10 V6-6+ $8.00 VS6-6 $0.90 * Suffix S for Ethylene Propylene * Suffix H for Viton m Suffix 104 for Silicone + Suffix S/S for 416 S/S q Suffix 303 for 303 S/S SPECIFICATIONS SERIES 3456 F O S T E R Foster Manufacturing Company JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 447 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page