Pneumatic And Hydraulic Equipment Page 391

INDUSTRIAL TOOLING Industrial Tooling Economy Electric Pumps 0.5 Horsepower Lightweight and compact design, 22 to 41 lbs Large easy-carry handle for maximum portability Two-speed operation reduces cycle times for improved productivity 115 VAC 50/60-cycle universal motor will operate on voltages as low as 60 volts 24 vdc remote motor control, 10-ft length for operator safety Starts under full load High strength molded shroud with integral handle, protects motor from contamination and damage Designed for intermittent duty cycle High efficiency cast aluminum air motor for increased life and reduced air consumption Fully serviceable air motor assembly Reinforced heavy-duty reservoir for applications in tough environments New generation air saver piston with rugged one-piece design reduces air consumption and operating costs Return-to-tank port for use in remote valve applications Quiet - only 76 dBA with low air consumption of 12 scfm Operating air pressure: 25-125 psi, enables pump to start at extremely low pressure Internal pressure relief valve provides overload protection The PAMG-models use a treadle with a locking feature and a 4-way manual valve. The PARG-models use a 15 ft. pendant hose for convenient one man operation. Industrial Tooling Air Hydraulic Pumps Part No.* Usable Oil (3/8" NPT Pressure Rating* Output Flow Rate Current Motor Sound Used with Capacity Pressure & (psi) (in 3 /min) Valve Draw Voltage Level Cylinder (gal.) Tank Ports) Price 1st stage 2nd stage 1st stage 2nd stage Type (Amps) (VAC) (dBA) .50 PUD-1100B $2,107.56 200 10,000 200 20 9.5 115 85 1.00 PUD-1101B $2,107.56 200 10,000 200 20 Dump ** 9.5 115 85 Single-acting .50 PUD-1300B $2,123.94 200 10,000 200 20 Dump 9.5 115 85 1.00 PUD-1301B $2,201.29 200 10,000 200 20 and Hold 9.5 115 85 .50 PUJ-1200B $1,979.25 200 10,000 200 20 3-way, 9.5 115 85 1.00 PUJ-1201B $2,050.23 200 10,000 200 20 2-pos. 9.5 115 85 Double-acting .50 PUJ-1400B $2,288.65 200 10,000 200 20 4-way, 9.5 115 85 1.00 PUJ-1401B $2,361.45 200 10,000 200 20 3-pos. 9.5 115 85 *For 230 volt applications replace "B" suffix with "E". **Electric dump valve for auto-retract of cyliners. PUD-1100 Series Provides advance/auto-retract of single-acting cylinders Ideal for punching applications For applications not requiring load holding 10-ft pendant controls motor and valve operation PUD-1300 Series Provides advance/hold/retract of single-acting cylinders 10-foot pendant controls motor and valve operation Ideal for applications requiring remote valve operation. PUJ-Series Available with 3- and 4-way valves for single- or double-acting cylinders 10-ft pendant controls the motor operation Manual valves provide advance/hold/retract tool control Reservoir Capacity: 150-305 in 3 Flow at Rated Pressure: 10 in 3 /min. Maximum Operating Pressure: 10,000 psi Pressure Output Flow Rate Air Pressure Air Sound Rating (in 3 /min) Valve Range Consumption Level (psi) No Load Load Part No. Function (psi) (scfm) (dBA) 10,000 60 10 PATG & PAMG Advance/ 25-125 12 76 10,000 51 1) 6 1) PARG Hold/ 25-125 12 76 10,000 48 2) 5 2) Retract 25-125 8 76 Used Usable with Cylinder Oil Capacity (in 3 ) Part No. Price 127 PATG-1102N* $696.15 Single- 230 PATG-1105N $794.43 acting 127 PARG-1102N $1,116.57 230 PARG-1105N $1,181.18 Double- 127 PAMG-1402N $1,099.28 acting 230 PAMG-1405N $1,114.75 1) Air supply connected at pendant. 2) Air supply connected at pump shown on flow curve. E N E R P A C Enerpac JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 391 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page