Pneumatic And Hydraulic Equipment Page 350

PISTON DIAMETER 8mm 10mm 12mm 16mm 20mm 25mm STROKE 25mm 50mm 75mm 100mm USW. ETC. MOUNTINGS N = NOSE MOUNT U = UNIVERSAL MOUNT SPECIAL OPTIONS C = ADJUSTABLE CUSHIONS EE = EXTRA ROD EXTENSION OF ___ MILLIMETERS HR = HIGH TEMPERATURE SEALS AND BUFFERS NT = NO ROD THREAD ISO 6432 STAINLESS STEEL BODY AIR CYLINDER Materials: Cylinder Barrel-4301 Stainless Steel (X5 CrNi 18.9) Cylinder Covers-Anodized Aluminum Alloy Cylinder Piston-Aluminum Alloy Piston Rod-4305 Stainless Steel (X12 CrNi S 18.8) Seals-Buna N Springs-Plated Music Wire Cushioning-Rubber Buffers, Not Adjustable Magnet-Nitrile Seals: Piston-U Cup Piston Rod-U Cup Rod Seal and Wiper Ring Operating Data: Pressure-10 Bar Maximum Temperature Range: E, ED and ES models: -20C to +70C (High Temperature Option Available, -18C to +205C) EM, EDM and ESM models: -20C to +70C Operating Medium-Compressed Air Lubricant-Shell Tellus Oil C 10 or Equivalent Standard Stroke Lengths: Double Acting, Nose Mount-10, 25, 40, 50, 80, 100, 125, 150 mm Double Acting, Universal Mount-10, 25, 40, 50, 80, 100, 125, 150 mm Single Acting, Nose Mount-10, 25, 40, 50 mm Single Acting, Universal Mount-10, 25, 40, 50 mm Double Acting, Double End Rod- 10, 25, 50, 75, 100, 150 mm Single Acting Spring Forces: Bore in mm Final Load 8, 10 2.7N 12, 16 6.2N 20 22.2N 25 31.1N Preload At Strokes Bore in mm 10mm 25mm 50mm 8, 10 2.2N 2N 1.3N 12, 16 5.8N 4.4N 3.1N 20 20N 16.5N 11.1N 25 28N 23.1N 15.6N HOW TO ORDER The model number consists of four alpha numeric clusters. These designate type, piston diameter, stroke, mounts, and special options. Please refer to the charts below for an example of model E-25-100-NHR. This is a nose mounted, double acting, single end rod, 25 mm diameter, 100 mm stroke cylinder with heat resistant seals and buffers. TYPE E = DOUBLE ACTING EM = MRS DOUBLE ACTING ED = DOUBLE ACTING DOUBLE END ROD EDM = MRS DOUBLE ACTING, DOUBLE END ROD ES = SINGLE ACTING ESM = MRS SINGLE ACTING E - 25 - 100 - N HR The BIMBA ISO 6432 air cylinder are available in bore sizes 10, 12, 16, 20 and 25mm. Models include EM (double acting), EDM (double acting, double end rod) and ESM (single acting). An optional permanent magnet made of nitrile is mounted on the piston to actuate the BIMBA Hall Effect or Magnetic Reed Switch. SPECIFICATIONS: Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 350 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page