Pneumatic And Hydraulic Equipment Page 334

PORT & CUSHION POSITIONS SERIES 'TRA', 'TRH' (TRIPLE PISTON ROD) How To Order SERIES TRA 250 PSI Air 400 PSI Hydraulic TRH Non-Shock Electroless Nickel EN-TRA (250 PSI Air) Electroless Nickel EN-TRH (400 PSI, Non-Shock) CUSHIONS H = Head Cushion Position 2 Standard Specify for Positions 1 or 4 C = Cap Cushion Position 6 Standard Specify for Positions 5, 7 or 8 STROKE See Stroke Options (Made to Order) BORE 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6", 8 STYLE Single End (Leave Blank) D3 Double End-3 Rods D1 Double End-1 Rod (KK1 Standard Rod End- See Options for Other Rod End Styles) NFPA MOUNTS MXO No Mount MS4 Bottom Tapped Holes MS2 Side Lug (1-1/2"-4" Bore) BASE BAR Side Lug (1-1/2"-4") Non-NFPA MP1 Rear Pivot (Extruded) MP2 Rear Pivot Casting (1-1/2"-6" Bore) MP4 Rear Pivot Eye Casting (1-1/2"-4" Bore) MF1 Front Flange (1-1/2"-6" Bore) MF2 Rear Flange (1-1/2"-6" Bore) ME4 Rear Mounting Holes (8" Bore) ME5 Front Mounting Holes (8" Bore) OPTIONS Adds Length to Cylinder-See Chart A/O Air/Oil Piston X B 1/4" Urethane Bumper Both Ends X BH 1/4" Urethane Bumper Head Only X BC 1/4" Urethane Bumper Cap Only "C" = Extended Piston Rods MA Micro-Adjust (6" Max. Stroke) MAB Micro-Adjust with Noise Dampening Bumper MPR* Magnetic Piston for Reed & Solid State Switches (R10, RAC, MSS) X MPR Combination Magnetic Piston & -WB Wearband (Specify on 1-1/2"-2-1/2" Bores Only) OP Optional Port Location (Specify) X ST Stop Tube (SPECIFY LENGTH) Example: ST = 2" SSR Stainless Steel Piston Rod SST Stainless Steel Tie Rods & Nuts SSF Stainless Steel Fasteners SSA Stainless Steel Piston Rod, Tie Rods & Nuts, and Fasteners VS Fluorocarbon Seals AS Adjustable Stroke (Retract) (SPECIFY LENGTH) Example: AS = 3" XX Special Variation (SPECIFY) BSP, SAE Ports (SPECIFY SIZE) STAINLESS STEEL 'TRA' & 'TRH' Consult JHF for available models and delivery 'TRA-MSE' & 'TRA-MSR' Triple Rod Cylinders can be furnished in multi-stage designs. (Consult JHF for details) OPERATING Carboxilated Nitrile: -20F to 200F (-25C to 90C) TEMPERATURE Fluorocarbon: 0F to 400F (-20C to 200C) Standard Port and Cushion Adjustment Positions Ports-Positions 1 and 5 (Ports not available at position 3) Cushion Adjustment-Postiton 2 and 6 (Cushions not available at position 3) Specify Non-Standard Locations When Ordering About our Part Number System Simple, easy to understand No excessive codes! Eliminates mistakes when ordering EXAMPLE: A Triple Rod Cylinder with a 3-1/4" Bore, 10" Stroke, Front Flange Mount, Head & Cap Cushions, Magnetic Piston for TRD Reed or Solid State Switches. Part Number: TRA - MF1 - 3-1/4" X 10 - HC - MPR OPTION LENGTH ADDER (ADD TO CATALOG BASIC OVERALL LENGTH DIMENSIONS) OPTION MPR MPR-WB (Without "WB" (Magnet & Bore B BC BH Wearband) Wearband) ST = 2 ST = 4 1-1/2 1/2 1/4 1/4 0 1/2 2 4 2 1/2 1/4 1/4 0 1/2 2 4 2-1/2 12 1/4 1/4 0 1/2 2 4 3-1/4 1/2 1/4 1/4 2 4 4 1/2 1/4 1/4 2 4 5 1/2 1/4 1/4 2 4 6 1/2 1/4 1/4 2 4 8 1/2 1/4 1/4 2 4 Note: If a stop tube is used on 1-1/2"-2-1/2" bore, there is no length adder for "MPR-WB" option other than the stop tube length. NOTE: There is no length adder for MPR Option and Wear Band on 3-1/4"-8" Bore TRA - MXO __ - 1 1 /2 X 1 - ____ - ______________________ Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 334 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page