Pneumatic And Hydraulic Equipment Page 312

How To Order The model number for Double-Wall cylinders consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options (options are written in the following order: rod end options, and special options with extra extension last). Mounting kits must be ordered as a separate item, and are shown with their respective bore sizes. Please refer to the charts below for an example of model number DWC-1710-2V. This is a 1-1/2" bore, 10" stroke, Double-Wall cylinder with a small male one piece rod end and Viton seals. DOUBLE-WALL-NFPA INTERCHANGEABLE CYLINDER Rod End (1-1/2", 2" and 2-1/2" Bores) Rod Thread-2, 2S, 1, 4C, 5C Rod Thread-4 Rod End (3-1/4", 4" Bores) Rod End Style A B C CC D MM 2 .75 1.12 .38 7/16-20 UNF .5 .62 2S .75 1.12 .38 7/16-20 UNF .5 .62 1 .75 1.12 .38 1/2-20 UNF .5 .62 4 (tapped) .75 1.12 .38 7/16-20 UNF .5 .62 4C 1.25 1.00 .19 1/2-13 UNC .5 .62 5C 1.25 1.00 .19 5/8-11 UNC .5 .62 Rod End Style A B C CC D MM 2 1.12 1.5 .5 3/4-16 UNF .88 1.00 2S 1.12 1.5 .5 3/4-16 UNF .88 1.00 1 1.12 1.5 .5 7/8-14 UNF .88 1.00 4 (tapped) 1.12 1.5 .5 3/4-16 UNF .88 1.00 OPTIONS G- Polymer Grease Lubrication DPX.XX-Dual Piston (contact JHF for pricing) (specify stop length) V-High Temperature Seals (300 F Maximum) EEX.XX-Extra Rod Extension (Add to end of model number) AXX-Alternate Cushion Screw Locations (Locations Available: 2 and 3 for head end, 6 and 7 for cap end) See dimen- sional drawing of cylinder for port locations. SR-Stainless Steel Rod DWC - 1710 - 2 V DW- Double Acting DWC-Double Acting, Cushions Both Ends DWF-Double Acting, Front Head Cushion DWR- Double Acting, Rear Cushion DWD- Double Acting, Double Rod End DWDC-Double Acting, Double Rod End, Cushions Both Ends DWDS-Double Acting, Double Rod End, Cushion One End DWM (C, F, R)-Double Acting, Magnetic Position Sensing (Cushion Optional) DWDM (C, F, R)-Double Rod End, Magnetic Position Sensing (Cushion Optional) DW(M)N (C, F, R)-Nose Mount, 1-1/2" and 2" Bores Only (Cushion and Magnet Optional) DWD(M)N (C, F, R)-Nose Mount, Double Rod End 1-1/2" and 3" Bores Only (Cushion and Magnet Optional DOUBLE-WALL TYPE 17-1-1/2" Bore 31-2" Bore 50-2-1/2" Bore 83-3-1/4" Bore 125-4" Bore BORE SIZE 0.5-1/2" Stroke 1.5-1" Stroke 2.5-2" Stroke 2.5-2-1/2" Stroke Etc. STROKE LENGTH 2- Small Male, One Piece 2S- Small Male Stud (Rolled Threads) 1- Large Male, One Piece 4- Female Threads 4C-Small Male, One Piece, Coarse Thread (1-1/2" and 2" Bores Only) 5C-Large Male, One Piece, Coarse Thread (1-1/2" and 2" Bores Only) NT-No Threads ROD END STYLE Rod Ends Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 312 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page