Pneumatic And Hydraulic Equipment Page 293

B I M B A How to Order The model number consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. Please refer to the example and charts below to determine the model number needed. The U.S. customary units (inch) model example shown below include options for external bumpers, magnetic position sensing, auxiliary port in the guide beam end cap and plugs installed in the guide beam end cap ports. PM-096-EBMRY BORE SIZE 09 - 1-1/16" 09 - 27mm 17 - 1-1/2" 17 - 38mm 31 - 2" 31 - 50mm 50 - 2-1/2" 50 - 63mm PRODUCT TYPE PM - U.S. Customary units PMM - (metric) (All external fasteners and ports are metric) STANDARD STROKE LENGTHS* 1" increments to 6" 25mm increments to 150mm * Stroke lengths beyond 6" are available up to a maximum of 15" (375mm). Fractional stroke lengths are also available. Consult John Henry Foster Co. for price and availability. OPTIONS A - Internal stroke adjustment, both ends 1 B - Internal bumpers - both ends EB - External bumpers - both ends (Can be used for stroke adjustment) M - Magnetic position sensing R - Auxiliary port - air/vacuum 2 S - Shock absorber - both directions with stroke adjustment S1 - Shock absorber - extend with stroke adjustment S2 - Shock absorber - retract with stroke adjustment Y - Air ports - side 3 1 Not required with shock absorber or external bumper. 2 Seals used allow air or vacuum transmitted through the actuator to the load beam tooling plate. 3 The standard unit offers both end and side ports in the guide beam end cap. The standard unit has flush surface plugs installed in the side ports. PneuMoments ordered with the "Y" option are shipped with the plugs installed in the end ports. Note - (Stroke lengths 15" and above) Stroke adjustment can be achieved by using External Bumber - Option EB or Shock Absorber - option S, S1, S2. These options will require a modified stop plate to compensate for guide rod deflection. Clean room applications - The PneuMoment has a 10-32 vent port (M5 for metric models) on the guide beam end cap. Remove the vent fitting and connect a vacuum line to this port for clean room service. PNEUMOMENT-PNEUMATIC ACTUATOR Prices Base Model PM / PMM A B EB M R S S1 S2 Y 09 (1-1/16") 420.50 $77.80 $21.70 $159.45 $6.00 $73.50 $396.80 $319.90 $319.90 N/C 17 (1-1/2") 579.45 N/A Base Price 31 - (2") 808.00 302.20 50 - (2-1/2") 1,101.75 N/A 24.80 285.75 19.70 81.85 811.40 592.65 592.65 N/C Stroke Adder 09 (1-1/16") 9.20 2.75 N/C 1.60 N/C .80 1.60 1.60 1.60 N/C per inch/ 17 (1-1/2") 13.05 N/A 25mm 31 - (2") 21.50 3.55 of stroke 50 - (2-1/2") 22.98 N/A N/C 3.80 N/C 2.00 3.40 3.80 3.80 N/C Option/Combination Availability Bore A B EB M R S Y 1-1/16" A,B,EB, (27mm) M,R,Y M,R,Y M,R,Y R,S,Y M,S,Y M,R,Y M,R,S 1-1/2" B,EB, (38mm) N/A M,R,Y M,R,Y R,S,Y M,S,Y M,R,Y M,R,S 2" (50mm) M,R,Y M,R,Y M,R,Y A,B,EB,R,S,Y A,B,EB,M,S,Y M,R,Y A,B,EB,M,R,S,Y 2-1/2" (63mm) N/A M,R,Y M,R,Y B,EB,R,S,Y A,B,EB,M,S,Y M,R,Y A,B,EB,M,R,S,Y Mounting Accessories Description Model Number Price Model Number Price 1-1/16" - 1-1/2" 2" - 2-1/2" 4 Mounting Clamps with Through Holes (U.S. Customary Units and Metric) PM-MC-09 $48.85 PM-MC-31 $67.90 End Flange Brackets with 4 Clamps - Threaded Hole (U.S. Customary Units Only) PM-EF-09 $83.20 PM-EF-31 $115.25 End Flange Brackets with 4 Clamps - Threaded Hole (Metric) PMM-EF-09 $91.40 PMM-EF-31 $115.25 End Flange Brackets with 4 Clamps - Through Hole (U.S. Customary Units) PM-EFT-09 $83.20 PM-EFT-31 $108.50 End Flange Brackets with 4 Clamps - Through Hole (Metric) PMM-EFT-09 $83.20 PMM-EFT-31 $108.50 Bimba JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 293 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page