Pneumatic And Hydraulic Equipment Page 258

ULTRAN SLIDE RODLESS CYLINDER Engineering Specifications 1 Option-B must be included at the end of part number if bumpers are being used with the Ultran Slide. (i.e., KUT-007-B) 2 Includes required quantity of all except bumpers, oil service piston seals, bodies, guide rods and switch track, which are sold separately. Consult John Henry Foster Co. for prices. Lubrication The Ultran rodless cylinder is prelubricated at the factory for extensive, maintenance-free operation. The life of the cylinder can be greatly lengthened by providing additional lubrication with an air line mist lubricator or direct introduction of oil to the cylinder every 100 linear miles of travel. Recommended oils are medium to heavy (20 to 30 weight). The carriage should also be lubricated every 100 linear miles with a high grade of bearing grease. Other types of prelubrication are available upon request. Guide shafts are self lubricating and require no external lubricants. Repairs Bimba recommends that the Ultran Slide be returned to Bimba for repairs. However, the following parts and kits are available for the Ultran Slide rodless cylinder. Weight (lbs.) Magnetic Coupling Strength (lbs.) Pressure Rating: 100 psi (Air or Hydraulic) Temperature Range: 0 to 170F Breakaway: Ultran Slide Gold Coupling Strength - Less than 25 psi Ultran Slide Silver Coupling Strength - Less than 20 psi Cylinder Ultran Gold Ultran Silver Bore (UGS) (USS) 5/16" (007) 13 8 7/16" (01) 20 10 9/16" (02) 29 16 3/4" (04) 61 33 7/8" (06) 102 55 1-1/16" (09) 127 74 1-1/4" (12) 190 110 1-1/2" (17) 270 150 2" (31) 552 332 Base Weight Cylinder Adder (0" Stroke) Bore per 1" (UGS) (USS) 5/16" (007) 0.24 0.23 0.05 7/16" (01) 0.52 0.51 0.08 9/16" (02) 1.44 1.38 0.10 3/4" (04) 2.70 2.58 0.13 7/8" (06) 3.61 3.49 0.21 1-1/16" (09) 5.66 5.47 0.28 1-1/4" (12) 7.38 7.12 0.35 1-1/2" (17) 14.48 13.90 0.49 2" (31) 38.48 37.17 1.13 Cylinder Bore Size PART 5/16" (007) 7/16" (01) 9/16" (02) 3/4" (04) 7/8" (06) 1-1/16" (09) 1-1/4" (12) 1-1/2" (17) 2" (31) Shaft bearing RD-50644 RD-50645 RD-48996 RD-48997 RD-50646 RD-48998 RD-50647 RD-48999 RD-50648 Shaft wiper N/A RD-22720 RD-23079 RD-15679 RD-23086 RD-50656 RD-16174 RD-50657 Tube seal RD-1476 RD-22653 RD-13012 RD-1078 RD-10050 RD-48874 RD-50769 RD-1147 RD-51438 Carriage bearing RD-51006 RD-51007 RD-41631 RD-41633 RD-51433 RD-41635 RD-51434 RD-41637 RD-49786 Carriage wiper N/A RD-49806 RD-47191 RD-47192 RD-49805 RD-47193 RD-49804 RD-47194 RD-49803 Piston bearing N/A RD-41632 RD-41634 RD-51435 RD-41636 RD-51436 RD-41638 RD-51439 Piston seal RD-13970-T RD-13435-T RD-45616 RD-45621 RD-50651 RD-45622 RD-50652 RD-45623 RD-50653 Piston bumper RD-50468 RD-50469 RD-33072 RD-33073 RD-33073 RD-33071 RD-33071 RD-33076 RD-36326 Shaft bumper RD-50802 RD-50803 RD-50279 RD-50280 RD-50804 RD-50281 RD-50805 RD-50282 RD-50806 Shaft washer RD-50797 RD-50798 RD-50283 RD-50284 RD-50799 RD-50285 RD-50800 RD-50286 RD-50801 Body 1 KUB-007 KUB-01 KUB-02 KUB-04 KUB-06 KUB-09 KUB-12 KUB-17 KUB-31 Guide Rods 1 KUG-007 KUG-01 KUG-02 KUG-04 KUG-06 KUG-09 KUG-12 KUG-17 KUG-31 Switch Track 1 KUT-007 KUT-01 KUT-02 KUT-04 KUT-06 KUT-09 KUT-12 KUT-17 KUT-31 Repair Kit 2 KU-007 KU-01 KU-02 KU-04 KU-06 KU-09 KU-12 KU-17 KU-31 Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 258 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page