Pneumatic And Hydraulic Equipment Page 247

B I M B A EXTRUDED LINEAR THRUSTER Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with filtered, lubricated air) Cylinder Lubrication PTFE grease Theoretical Cylinder Forces FORCE = Power Factor (PF) x Input Pressure PF x bar = kg; PF x psi = pounds Input = PSI Input = Bar Bore PF Extend PF Retract PF Extend PF Retract 12mm 0.2 0.1 1.1 0.8 16mm 0.3 0.2 2.0 1.5 20mm 0.5 0.4 3.1 2.4 25mm 0.8 0.6 4.9 3.8 32mm 1.2 0.9 8.0 6.0 How to Order The model number for Extruded Linear Thrusters consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. Please note the following features are standard, and are included in all model numbers: E (inch-series threading), and M (magnet) for position sensing. Model Extruded Thruster ET - Extended Shafts; 4 bushings Extruded Thruster ETS - Shafts Flush; 2 bushings Extruded Thruster ETD - Double-end; Saddle Mount Bore Sizes 12 - 12mm 16 - 16mm 20 - 20mm 25 - 25mm 32 - 32mm Options U.S. Customary Units E Inch Series Porting/Mounting *Standard; included in all model numbers External Bumpers EB External Bumpers, Retract EB1 External Bumpers, Extend EB2 External Bumpers, Both Ends ETS - EB available only No Stroke Reduction with Bumpers Extend Bumpers include One Set of Collars Shock Absorbers K _ _ First _ will be: 1-Both Ends 2-Extend Only 3-Retract Only Second _ will be: 1 - Light Duty 2 - Medium Duty 3 - Heavy Duty ETS - K3 available only (retract only) See Minimum Stroke Note in Stroke Table Magnetic Position Sensing M MRS Position Sensing *Standard; included in all model numbers Alternate Port Location P Ports on Top Surface Must be specified if Option X is ordered Fluoroelastomer Seals V High Temperature (0 to 275 deg F) Ball Bushings X Ball Bushings and Hardened Shafts Must specify Option P with X Option ET - 16100 - EK12M Standard Stroke Lengths 5mm Increments to 255mm Exceptions ET with Option X ET with Option K ETD with Option X (Ball Bearings) (Shock Absorbers) Only 2 Bushings (not 4) Minimum Stroke Length when stroke is less than 26mm N/A 26mm N/A 26mm N/A 26mm 39mm 16mm 39mm 42mm 45mm 42mm Model Type 12mm 16mm 20mm 25mm 32mm ET (extended shafts, 4 bushings) $174.75 $189.25 $202.70 $228.30 $300.05 add per 5mm stroke 0.95 1.05 1.10 1.15 1.70 ETS (shafts flush, 2 bushings) 171.40 185.50 198.40 223.75 294.05 add per 5mm stroke 0.90 0.95 1.00 1.05 1.35 ETD (double-end, saddle mount) 192.30 208.15 222.60 251.20 330.00 add per 5mm stroke 0.95 1.05 1.10 1.15 1.70 Options 12mm 16mm 20mm 25mm 32mm EB (External Bumpers, Retract) 8.20 8.20 10.85 13.45 16.20 EB1 (External Bumpers, Extend) 24.10 24.10 29.45 35.35 40.00 EB2 (External Bumpers, Both Ends) 32.10 32.10 40.00 48.65 55.95 K_ (Shock Absorbers); Per End 109.95 139.15 155.50 172.85 186.85 V (High Temperature Seals) 13.95 16.55 16.65 19.15 21.80 X (Ball Bushings) ETS 66.55 66.55 79.90 83.15 96.75 X (Ball Bushings) ETD and ET 133.00 133.00 159.60 166.20 193.40 Prices No Charge Options: P Included as Standard in Base: E, M Bimba JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 247 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page