Pneumatic And Hydraulic Equipment Page 237

B I M B A BORE SIZE TE-098-EB1M THRUSTER HIOUSING OPTIONS** STANDARD STROKE LENGTHS* 1" increments to 6" 1" increments to 12" 1" increments to 12 02 - 9/16" 04 - 3/4" 09 - 1-1/16" 17 - 1-1/2" 31 - 2" 50 - 2-1/2" 70 - 3" B - Internal bumpers, both ends 1 C - Adjustable cushions, both ends 1 D - Dowel pin holes for Transition Plate 2 EB1 - External bumpers, extension (one set) EB2 - External bumpers, both ends (two sets) K_ _ - Shock absorbers 3 First_will be: 1 - Shock both ends 2 - Shock extend only 3 - Shock retract only Second_will be: 1 - Light shock 2 - Standard shock 3 - Heavy shock M - MRS magnetic position sensing 4 H - Tapped holes P - Mounting plate (includes 12 tapped holes) S - Stainless steel tooling plate and optional shaft collars 1 Internal bumpers and cushions cannot be ordered in combination. Adjustable cushions are not available for 9/16" or 2" bore size. 2 Transition Plate Applications: Option -H or -P must be ordered. Option-D must also be ordered if dowel pin holes are required. Not available in 2-1/2" and 3" bores. 3 Shocks not available on 2-1/2" and 3" bores. 4 Hall Effect Switch not available for 9/16" bore size. NOTE: TE Series Linear Thruster includes shaft collars only when external bumpers are ordered as an option. Shaft collars can also be ordered separately as a repair part. *Stroke lengths beyond maximum are available; the rear of the cylinder must be supported in horizontal applications. How to Order The model number of all Linear Thrusters consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. Please refer to the charts below for an example of model number TE-098-EB1M. This is a 1-1/16" bore, 8" stroke TE series Linear Thruster with extension external bumpers and a magnet for position sensing. Approximate Power Factors 9/16" = 0.2 3/4" = 0.4 1-1/16" = 0.9 1-1/2" = 1.7 2" = 3.1 2-1/2" = 5.0 3" = 7.0 For example, a TE-046-EB1M will exert a force of 0.4 times the air line pressure; a TE-173-EB1M will exert a force of 1.7 times the air pressure, etc. LINEAR THRUSTER-TE SERIES (COMPOSITE BEARINGS) **See Original Line section per cylinder bore size for cylider options. Bimba JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 237 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page