Pneumatic And Hydraulic Equipment Page 210

EFT-3225-3M The Model Number for the EF2 cylinder consists of three alphanumeric clusters. These designate type, bore size and stroke length, and options. Please refer to the charts below for an example of Model Number EFT-3225-1M. This is a 32mm bore, double acting, guided cylinder with metric threads and ports, 25mm stroke, threaded bottom mounting holes, and magnetic position sensing. How to Order EFT - Double Acting, Non-rotating EFDT - Double Actind, Double End Rod, Non-rotating TYPE STROKE LENGTH*** OPTIONS See Stroke Length Availability Chart (Enter in numeric order) MOUNTING OPTIONS No Number - Basic model 3 - Threaded front/rear mounting option * 6 - Rear clevis mount * 6N - Rear clevis 90 (Enter in alphabetical order, except EE which is last) B - Bumpers (see page 25) 1 C - Stainless Steel Retaining Ring E - U.S. customary units (inch) 2 F - Full-Flow Port Orifice 4 M - Magnetic position sensing (see page 25) 3 P - Blank tooling plate V - High temperature option -10C to 110C (15F to 225F) EE - Extra Rod Extensions in 1mm Increments 1 Bumpers reduce stroke length. When bumper is specified with option V, standard bumper material is supplied. Operating temperature remains -10 to 70C (15 to 160F). 2 When option E is specified, user interface threads are designated U.S. customary (inch). This includes ports, rod threads and threaded mounting options (as applicable). 3 When magnetic position sensing is specified with option V, operating temperature remains -10 to 70C (15 to 160F). This combination is recommended when fluoroelastomer is specified for compatibility. 4 Automatically includes bumpers, so stroke is reduced by 3mm. BORE SIZE mm (inch) ** 12mm - (1/2") 16mm - (5/8") 20mm - (3/4") 25mm - (1") 32mm - (1-1/4") 40mm - (1-1/2") 50mm - (2") 63mm - (2-1/2") 80mm - (3-1/4") 100mm - (4") *For dimensions, see threaded front/rear mount (-3) on EF1 Mounting options. Please note that throughout all catalog charts, metric measurements are shown first and U.S. customary units (inches) are in parentheses. ** NOTE: Numbers in parentheses are the eq. bore size in inches. Listed for reference only. DO NOT use for model designation. *** When stroke length exceeds 30mm, a threaded mounting option should be considered. Mounting bolts that span the entire cylinder length may not be readily available. Prices Stroke Length Availability No charge options: E (U.S. Customary Units), P. *Contact JHF for Double Rod Adder Bore Size Model Type 12mm 16mm 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm EFT $50.20 $56.50 $64.65 $72.80 $91.35 $105.85 $122.60 $141.60 $168.35 $225.35 Add per 5 mm $2.55 $2.55 $2.55 $2.90 $2.90 $2.90 $3.60 $4.15 $4.50 $5.35 EFDT $63.00 $69.45 $79.15 $87.05 $107.05 $126.00 $144.70 $172.75 $208.00 $284.65 Add per 5 mm $3.30 $3.30 $3.30 $3.45 $3.45 $3.70 $4.60 $5.20 $5.80 $7.20 Mounting Options 3 $7.05 $7.30 $9.65 $10.00 $11.25 $11.25 $12.55 $13.30 $13.95 $14.60 6, 6N $13.70 $14.40 $15.45 $17.85 $19.45 $21.80 $25.25 $32.70 $39.85 $53.05 Options B $4.20 $7.30 $7.30 $7.30 $8.60 $8.60 $9.80 $11.80 $17.95 $20.65 C* $3.45 $3.70 $4.90 $5.45 $6.65 $9.95 $17.00 $20.25 $132.40 $226.65 F (includes B) $11.25 $14.50 $14.50 $16.30 $17.75 $19.30 $20.60 $22.75 $29.15 $32.65 M $6.20 $9.95 $9.95 $9.95 $12.25 $12.25 $14.40 $17.50 $22.35 $26.15 V (EFT) $13.65 $15.45 $15.45 $18.70 $20.80 $29.65 $32.65 $42.25 $51.75 $65.35 V (EFDT) $15.60 $18.15 $18.15 $24.25 $27.80 $40.05 $44.15 $57.75 $66.80 $75.25 EE (per 1mm) $0.65 $0.65 $0.65 $0.80 $0.80 $0.80 $0.95 $0.95 $1.20 $1.20 X (base) $6.70 $7.60 $9.80 $11.45 $15.70 $17.45 $19.05 $19.15 $20.30 $21.30 Add per 5mm $1.50 $1.50 $1.50 $1.55 $1.55 $1.60 $1.90 $2.10 $2.30 $2.80 NOTE: Stroke lengths are available in 5mm increments up to the maximum standard stroke. Body length corresponds with that of the next standard stroke length. For example, a 40mm bore, 55mm stroke cylinder has the body length of a 75mm stroke cylinder. When a stroke exceeds 30mm, a threaded mounting option should be considered. Mounting bolts that span the entire cylinder length may not be readily available. Double Acting Bore Standard Stroke Lengths (mm) 12mm (1/2") 16mm (5/8") 5, 10, 15, 20, 25, 30 20mm (3/4") 5, 10, 15, 20, 25, 30 25mm (1") 35, 40, 45, 50 32mm (1-1/4") 5, 10, 15, 20, 25, 30 40mm (1-1/2") 35, 40, 45, 50, 75, 100 50mm (2") 63mm (2-1/2") 10, 15, 20, 25, 30, 35 80mm (3-1/4") 40, 45, 50, 75, 100 100mm (4") EF2 CYLINDERS Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 210 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page