Pneumatic And Hydraulic Equipment Page 207

B I M B A Dimensions Shown in millimeters (inches) D B + STROKE* A F C E D B + STROKE* A F + STROKE C E Spring Retract (Model EFS) Spring Extend (Model EFR) Spring Retract/Spring Extend When option E is specified, user interface threads are designated U.S. customary (inch). This includes ports, rod threads and threaded mounting options (as applicable). See EFI Cylinder option page for body lengths with MRS option. Mounting Options T H A Threaded Bottom Mount (-1) U Threaded Front/Rear Mount (-3) W TYP. X Y SECTION "A-A" Note: On the following models, only the front set of threaded bottom mounting holes is provided; EF-205, EF-2010, EF-255, EF-325, EF-8010. Note: On EFT Models, there are two threaded holes per end. Bore H T U 12mm (1/2") 15.5 (0.61) M4 x 0.7 6H (8-32 UNC-2B) 6.6 (0.26) 16mm (5/8") 20.0 (0.79) M4 x 0.7 6H (8-32 UNC-2B) 6.6 (0.26) 20mm (3/4") 25.5 (1.00) M6 x 1.0 6H (1/4-20 UNC-2B) 11.2 (0.44) 25mm (1") 28.0 (1.10) M6 x 1.0 6H (1/4-20 UNC-2B) 11.2 (0.44) 32mm (1-1/4") 34.0 (1.34) M6 x 1.0 6H (1/4-20 UNC-2B) 11.2 (0.44) 40mm (1-1/2") 40.0 (1.57) M6 x 1.0 6H (1/4-20 UNC-2B) 11.2 (0.44) 50mm (2") 50.0 (1.97) M8 x 1.25 6H (5/16-18 UNC-2B) 13.0 (0.51) 63mm (2-1/2") 60.0 (2.36) M10 x 1.5 6H (7/16-14 UNC-2B) 16.8 (0.66) 80mm (3-1/4") 77.0 (3.03) M12 x 1.75 6H (1/2-13 UNC-2B) 20.8 (0.82) 100mm (4") 94.0 (3.70) M12 x 1.75 6H (1/2-13 UNC-2B) 20.8 (0.82) Bore A B C D E F 12mm (1/2") 3.8 (0.15) 17.0 (0.67) 8.9 (0.35) M5 x 0.8 (#10-32) 6.0 (0.24) 3.5 (0.14) 16mm (5/8") 4.6 (0.18) 18.5 (0.73) 9.4 (0.37) M5 x 0.8 (#10-32) 8.0 (0.31) 3.5 (0.14) 20mm (3/4") 4.8 (0.19) 19.5 (0.77) 9.4 (0.37) M5 x 0.8 (#10-32) 10.0 (0.39) 4.5 (0.18) 25mm (1") 5.1 (0.20) 22.5 (0.89) 10.9 (0.43) M5 x 0.8 (#10-32) 12.0 (0.47) 5.0 (0.20) 32mm (1-1/4") 7.1 (0.28) 23.0 (0.91) 10.4 (0.41) G - 1/8 (NPT 1/8) 16.0 (0.63) 7.0 (0.28) 40mm (1-1/2") 7.4 (0.29) 29.5 (1.16) 13.2 (0.52) G - 1/8 (NPT 1/8) 16.0 (0.63) 7.0 (0.28) 50mm (2") 9.4 (0.37) 30.5 (1.20) 13.7 (0.54) G - 1/4 (NPT 1/4) 20.0 (0.79) 8.0 (0.31) 63mm (2-1/2") 9.7 (0.38) 36.0 (1.42) 15.7 (0.62) G - 1/4 (NPT 1/4) 20.0 (0.79) 8.0 (0.31) 80mm (3-1/4") 11.7 (0.46) 43.5 (1.71) 17.8 (0.70) G - 3/8 (NPT 3/8) 25.0 (0.98) 10.0 (0.39) Bore W X Y 12mm (1/2") M4 x 0.7 (8-32 UNC) 10.5 (0.41) 7.0 (0.28) 16mm (5/8") M4 x 0.7 (8-32 UNC) 10.5 (0.41) 7.0 (0.28) 20mm (3/4") M6 x 1.0 (1/4-20 UNC) 17.0 (0.67) 10.0 (0.39) 25mm (1") M6 x 1.0 (1/4-20 UNC) 17.0 (0.67) 10.0 (0.39) 32mm (1-1/4") M6 x 1.0 (1/4-20 UNC) 17.0 (0.67) 10.0 (0.39) 40mm (1-1/2") M6 x 1.0 (1/4-20 UNC) 17.0 (0.67) 10.0 (0.39) 50mm (2") M8 x 1.25 (5/16-18 UNC) 22.0 (0.87) 14.0 (0.55) 63mm (2-1/2") M10 x 1.5 (7/16-14 UNC) 28.5 (1.12) 18.0 (0.71) 80mm (3-1/4") M12 x 1.75 (1/2-13 UNC) 35.6 (1.40) 22.0 (0.87) 100mm (4") M12 x 1.75 (1/2-13 UNC) 35.6 (1.40) 22.0 (0.87) EF1 CYLINDERS Bimba JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 207 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page