Pneumatic And Hydraulic Equipment Page 206

D A F + STROKE F E H I P J - C.BORE K - C.BORE DEPTH L - THROUGH HOLE O R Q N M V + (2 x STROKE) * B + STROKE * A Shown in millimeters (inches) Dimensions Double Acting/Double Rod Stroke lengths are available in 5mm increments up to the maximum standard stroke. Body length corresponds with that of the next standard stroke length. For example, a 40mm bore, 55mm stroke cylinder has the body length of a 75mm stroke cylinder. When a stroke exceeds 30mm, a threaded mounting option should be considered. Mounting bolts that span the entire cylinder length may not be readily available. When option E is specified, user interface threads are designated U.S. customary (inch). This includes ports, rod threads and threaded mounting options (as applicable). Bore A B D E F H I 12mm (1/2") 10.6 (0.42) 25.2 (0.99) M5 x 0.8 (#10-32) 6.0 (0.24) 3.5 (0.14) 15.5 (0.61) N/A 16mm (5/8") 10.7 (0.42) 26.0 (1.03) M5 x 0.8 (#10-32) 8.0 (0.31) 3.5 (0.14) 20.0 (0.79) 8.7 (0.34) 20mm (3/4") 10.1 (0.40) 26.0 (1.03) M5 x 0.8 (#10-32) 10.0 (0.39) 4.5 (0.18) 25.5 (1.00) 9.5 (0.37) 25mm (1") 11.2 (0.44) 29.0 (1.14) M5 x 0.8 (#10-32) 12.0 (0.47) 5.0 (0.20) 28.0 (1.10) 10.3 (0.41) 32mm (1-1/4") 8.9 (0.35) 30.5 (1.20) G - 1/8 (NPT 1/8) 16.0 (0.63) 7.0 (0.28) 34.0 (1.34) 18.5 (0.73) 40mm (1-1/2") 13.1 (0.52) 40.0 (1.58) G - 1/8 (NPT 1/8) 16.0 (0.63) 7.0 (0.28) 40.0 (1.57) 17.3 (0.68) 50mm (2") 12.2 (0.48) 40.5 (1.60) G - 1/4 (NPT 1/4) 20.0 (0.79) 8.0 (0.31) 50.0 (1.97) 20.0 (0.79) 63mm (2-1/2") 12.8 (0.50) 42.0 (1.66) G - 1/4 (NPT 1/4) 20.0 (0.79) 8.0 (0.31) 60.0 (2.36) 20.0 (0.79) 80mm (3-1/4") 14.4 (0.57) 51.0 (2.01) G - 3/8 (NPT 3/8) 25.0 (0.98) 10.0 (0.39) 77.0 (3.03) 26.0 (1.02) 100mm (4") 18.3 (0.72) 60.5 (2.32) G - 3/8 (NPT 3/8) 30.0 (1.18) 12.0 (0.47) 94.0 (3.70) 26.0 (1.02) Bore J K L M N O P 12mm (1/2") 6.1 (0.24) 3.5 (0.14) 3.5 (0.14) 25.0 (0.98) 5.0 (0.19) 25.0 (0.98) 32.0 (1.26) 16mm (5/8") 6.5 (0.26) 3.5 (0.14) 3.5 (0.14) 29.0 (1.14) 6.0 (0.25) 29.0 (1.14) 38.0 (1.50) 20mm (3/4") 9.0 (0.35) 7.0 (0.28) 5.5 (0.22) 36.0 (1.42) 8.0 (0.31) 36.0 (1.42) 47.0 (1.85) 25mm (1") 9.0 (0.35) 7.0 (0.28) 5.5 (0.22) 40.0 (1.57) 10.0 (0.38) 40.0 (1.57) 52.0 (2.05) 32mm (1-1/4") 9.0 (0.35) 7.0 (0.28) 5.5 (0.22) 45.0 (1.77) 14.0 (0.56) 49.5 (1.95) 60.0 (2.36) 40mm (1-1/2") 9.0 (0.35) 7.0 (0.28) 5.5 (0.22) 52.0 (2.05) 14.0 (0.56) 57.0 (2.24) 69.0 (2.72) 50mm (2") 11.1 (0.44) 8.0 (0.31) 6.9 (0.27) 64.0 (2.52) 17.0 (0.69) 71.0 (2.80) 86.0 (3.39) 63mm (2-1/2") 14.1 (0.56) 10.5 (0.41) 8.8 (0.35) 77.0 (3.03) 17.0 (0.69) 84.0 (3.31) 103.0 (4.06) 80mm (3-1/4") 17.5 (0.69) 13.5 (0.53) 11.0 (0.43) 98.0 (3.86) 22.0 (0.88) 104.0 (4.09) 132.0 (5.20) 100mm (4") 17.5 (0.69) 13.5 (0.53) 11.0 (0.43) 117.0 (4.61) 27.0 (1.06) 123.5 (4.86) 156.0 (6.14) Bore Q R V 12mm (1/2") 5.3 (0.21) M3 x 0.5 6H (#8-32 UNC-2B) 32.4 (1.27) 16mm (5/8") 7.8 (0.31) M4 x 0.7 6H (#8-32 UNC-2B) 33.2 (1.31) 20mm (3/4") 10.5 (0.41) M5 x 0.8 6H (#10-32 UNF-2B) 35.2 (1.39) 25mm (1") 11.5 (0.45) M6 x 1.0 6H (1/4-28 UNF-2B) 39.2 (1.54) 32mm (1-1/4") 17.7 (0.70) M8 x 1.25 6H (5/16-24 UNF-2B) 44.7 (1.76) 40mm (1-1/2") 24.5 (0.96) M8 x 1.25 6H (3/8-24 UNF-2B) 54.2 (2.14) 50mm (2") 29.3 (1.16) M10 x 1.5 6H (1/2-20 UNF-2B) 56.3 (2.22) 63mm (2-1/2") 29.1 (1.15) M10 x 1.5 6H (1/2-20 UNF-2B) 57.8 (2.28) 80mm (3-1/4") 28.1 (1.11) M16 x 2.0 6H (5/8-18 UNF-2B) 70.8 (2.79) 100mm (4") 32.3 (1.27) M20 x 2.5 6H (3/4-16 UNF-2B) 84.3 (3.26) EF1 CYLINDERS See EF1 Cylinder option page for body lengths with MRS option Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 206 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page