Pneumatic And Hydraulic Equipment Page 184

SQUARE FLAT-II SERIES Repair Kits Weights Options *A minimum stroke of 0.38" is required to sense extending end-of-stroke position. Bimba Hall Effect Switches Magnetic position sensing is achieved by adding a magnet to an optional, modified piston. The switch mounting causes an extension outside of the cylinder diameter as shown. 3 .365 4 1 2 Switch Location For the M Option, the switch mounting track will be located in Position 2. To locate the track in other positions, specify M1 or M4. To include additional track, specify T1 or T4. Note: Dimension applies to all bore sizes. Complete information on Bimba position sensing switches is available in Position Sensing Switches Section. The following switches are available for Square Flat-II cylinders: Track-mounted Hall Effect Switches HK HKQ HC HCQ Basic Repair Kit (K-B-FST)* Part No. Description Quantity PF-29-FST Rod Seal 2 PF-30-FST Piston Seal 1 PF-3-FST Tube Seal 2 Approximate Cylinder Weights (oz.) Bore Adder Per 1/8" Base of Stroke 3/4" (04) 2.7 0.1 1-1/16" (09) 6.4 0.5 1-1/2" (17) 12.2 0.7 2" (31) 18.4 0.9 Length Adder Bore Low Friction Seals Low Friction Magnetic Position and Magnetic Seals (L) Sensing* (M) Position Sensing 3/4" (04) 0.25 0.75 1-1/16" (09) 0.25 0.50 1-1/2" (17) 0.25 0.63 2" (31) 0.25 0.63 Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 184 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page