Pneumatic And Hydraulic Equipment Page 181

B I M B A Features Body - 304 Stainless Steel Heads - Anodized Aluminum Alloy Piston Rod - Ground and Polished 303 Stainless Steel Piston Seals - Enhanced Lubricity Buna N (High temperature seals optional) Rod Bushing - Bronze Rod Seals - Buna N Block V (High temperature seals optional) Tie Rods - 303 Stainless Steel Rod End Block - Anodized Aluminum Alloy Pressure Rating - 200 PSI Maximum (Air only) Temperature Rating - From -20F to +150F Buna N seals with a temperature range of -20F to +150F are standard in all Bimba air cylinders. Fluoroelastomer seals rated for higher temperature applications are available. If cylinders are operated below 0F (-18C) for extended time periods, special modifi cations may be required. Special seal materials are available upon request. SQUARE FLAT-II SERIES How to Order FST-170.125-1V The Model Number for all Square Flat-II cylinders consists of three alphanumeric clusters. These designate type, bore size and stroke length, mounting and special options. Please refer to the charts below for an example of Model Number FST-170.125-1V. This is a nonrotating, double acting, 1-1/2" bore, 1/8" stroke, pivot mount cylinder with high temperature seals. TYPE FST - Nonrotating, Double Acting BORE SIZE 04 - 3/4" 09 - 1-1/16" 17 - 1-1/2" 31 - 2" STROKE LENGTH 0.125 - 1/8" 0.25 - 1/4" 0.375 - 3/8" ETC. MOUNTING OPTIONS No Number - Basic model 1 - Pivot mount 1N - Pivot mount 90 from standard CE - Counterbored Endblock G - Magnalube G K - Endblock rotated 90 degrees L - Low Friction Seals M, M1, M4 - Magnetic Position Sensing 1 T1, T4 - Additional switch track located in position #1 or 4 Q - Low temperature option (-40F to 200F) V - High temperature option (0F to 400F) Y - Moly-coat (MoS 2 I. D. coating) EE0.375 - 3/8" extra rod extension, etc. EE1 - 1" extra rod extension, etc. 1 If magnetic position sensing is specified with option V, standard Buna-N based magnet will be provided. Magnetic position sensing is not reliable above 200F. (Enter in alphabetical order, except EE which is last) OPTIONS Prices No Charge Options - CE, G, K Base Price by Bore Size 3/4" (04) 1-1/16" (09) 1-1/2" (17) 2" (31) Base Model $75.75 $97.15 $115.40 $133.10 Adder per 1/8" of stroke $0.50 $0.65 $ 0.90 $1.15 Adders by Bore Size 3/4" (04) 1-1/16" (09) 1-1/2 "(17) 2" (31) Pivot Mount (Options 1,1N) $16.25 $17.75 $22.45 $25.15 Adders by Bore Size 3/4" (04) 1-1/16" (09) 1-1/2" (17) 2" (31) EE (each 1/2" each end) $0.90 $1.00 $1.15 $1.50 V Option (Standard Seals) $5.20 $7.65 $11.65 $15.00 V Option (Low Friction Seals) $13.25 $20.80 $25.85 $40.15 L (Low Friction Seals) $3.65 $4.50 $5.00 $5.95 Magnetic Position Sensing (Options M, M1, M3, M4) $7.05 $7.05 $10.30 $17.25 Switch Mounting Post (Options T1, T4) (Per post) $3.80 $3.80 $3.80 $3.80 Q Option (Standard Seals) $5.70 $7.10 $8.85 $11.05 Q Option (Low Friction Seals) $12.10 $15.05 $18.95 $23.70 Y (Adder per 1/8" of stroke) $0.55 $0.55 $0.55 $0.55 Basic Model Mounting Options Options Bimba JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 181 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page