Pneumatic And Hydraulic Equipment Page 168

FLAT-1 SERIES Mounting Options - Dimensions Maximum Torque Recommendations for Nose Mount Option (ft.-lbs.) Options (Dimensional variations from standard as shown.) *Heavy duty rear head is recommended for applications where the cylinder is mounted on the front face or trunnion-mounted, and impact loading (20 or more cycles per minute) occurs between the piston and rear head. It increases the overall length of the cylinder as shown. **A minimum stroke of 0.38 inches is required to sense extending end-of-stroke position. For low friction seals used in conjunction with magnetic position sensing, use M length adder only. Bore AA AB AC AD AE AF M N P Q 9/16" (02) .06 0.75 Hex .38 1/2-20 UNF-2A .50 .31 N/A N/A N/A 0.19 3/4" (04) .06 0.75 Hex .38 5/8-18 UNF-2A .62 .25 0.31 0.12 0.17 0.19 1-1/16" (09) .13 1.50 Hex .75 1-14 UNF-2A 1.00 .55 0.50 0.25 0.25 0.19 1-1/2" (17) .13 1.88 Hex .75 1-1/4-12 UNF-2A 1.25 .52 0.50 0.25 0.25 0.38 2" (31) .19 1.88 Hex .88 1-3/8-12 UNF-2A 1.38 .52 0.50 0.25 0.25 0.38 2-1/2" (50) .25 1.88 Hex 1.00 1-3/8-12 UNF-2A 1.38 .52 0.63 0.31 0.33 0.38 3" (70) .25 1.88 Hex 1.00 1-3/8-12 UNF-2A 1.38 .52 0.63 0.31 0.33 0.63 4" (125) .19 2.62 Hex 1.12 1-3/4-12 UNF-2A 1.75 .88 0.75 0.38 0.42 0.63 Bore R S T U W X Y Z 9/16" (02) #4-40 UNC 0.38 0.19 0.25 0.75 0.17 0.63 0.19 3/4" (04) #6-32 UNC 0.38 0.19 0.25 0.75 0.23 0.75 0.19 1-1/16" (09) #6-32 UNC 0.38 0.25 0.25 0.81 0.25 0.75 0.19 1-1/2" (17) #10-24 UNC 0.75 0.25 0.44 1.19 0.34 1.38 0.38 2" (31) #10-24 UNC 0.75 0.31 0.44 1.25 0.34 1.38 0.38 2-1/2" (50) 1/4-20 UNC 0.75 0.38 0.44 1.31 0.41 1.38 0.38 3" (70) 1/4-20 UNC 1.00 0.38 0.56 1.69 0.41 1.88 0.38 4" (125) 5/16-18 UNC 1.00 0.44 0.56 1.75 0.50 1.88 0.38 Bore Maximum Torque 9/16" (02) 12 3/4" (04) 28 1-1/16" (09) 100 1-1/2" (17) 120 2" (31) 130 2-1/2" (50) 130 3" (70) 130 4" (125) 150 Length Adder Bore Low Friction Heavy Duty Magnetic Position Sensing ** (M) Seals (L) Rear Head* (HD) FO, FOD FOS FOR 9/16" (02) 0.25 0.13 0.88 0.63 0.38 3/4" (04) 0.25 0.13 0.88 1-1/16" (09) 0.38 0.19 0.88 1-1/2" (17) 0.38 0.19 0.88 2" (31) 0.38 0.19 0.88 2-1/2" (50) 0.38 0.25 0.88 3" (70) 0.50 0.25 0.88 4" (125) 0.50 0.38 0.88 Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 168 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page