Pneumatic And Hydraulic Equipment Page 156

Mounting Styles D - Double Acting Nose Mount DXP - Double Acting, Double End or Rear Pivot Mount Stroke Lengths In inches and decimal fractions, i.e., 1.75". See individual models for maximum standard stroke. Stroke lengths are available up to 50". 1. Corrosion resistant 303 Stainless Steel end caps. 2. 304 SS body with mirror finish ID for long, reliable seal life. 3. Urethane rod wiper designed to withstand exposure to harsh chemical solutions while limiting ingress of the solutions and application matter into the cylinder. 4. PTFE-based rod and pivot bushings selected for their resistance to many commonly used cleaning solutions. 5. Nitrile seals are standard with optional high temperature or other materials available. How to Order The model number of all Original Line Cylinders consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and mounting styles and options. Please refer to the charts below for an example of model number SS-092-DW. This is a 303 Stainless Steel End cap Cylinder, 1-1/16" bore, Double Acting Nose Mount, Rod Wiper (standard). SS - 09 2 - D W Model Type SS - 303 Stainless Steel End caps SSM - Includes Magnet Piston *Stainless Steel Rod Standard on all Models Bore Size/Power Factors 04 - 3/4" 09 - 1-1/16" 17 - 1-1/2" 31 - 2" ALL STAINLESS STEEL NON-REPAIRABLE ORIGINAL LINE CYLINDERS Options EE - Extra Rod Extension of x.xx" F - Molycoated Body G - Magnalube G Lubrication N - Low Temperature Seals and Lube NT - No Rod Thread V - High Temperature Seals and Lube W - Rod Wiper (standard) * Consult the option combination availability chart. * Rod Wiper is standard; "W" option must be included in part number. Magnalube is a registered trademark of Carleton Stuart Corp. Bimba Bore Mounting Stroke Adder Options D DXP EE (per inch) N M V 5/16" (007) $71.30 $87.75 $1.75 $.95 $1.45 $8.50 $11.70 7/16" (01) $74.85 $95.80 $1.95 $.95 $1.45 $9.10 $11.70 9/16" (02) $76.50 $98.50 $1.95 $.95 $1.45 $10.50 $11.70 3/4" (04) $88.50 $108.40 $1.95 $.95 $1.45 $10.50 $11.85 7/8" (06) $90.00 $115.35 $1.95 $.95 $1.45 $10.80 $14.15 1-1/16" (09) $95.70 $115.50 $1.95 $.95 $1.45 $13.00 $14.15 1-1/4" (12) $99.35 $117.00 $2.45 $1.45 $2.25 $13.55 $15.70 1-1/2" (17) $105.60 $122.00 $3.00 $1.45 $2.75 $15.70 $15.70 1-3/4" (24) $109.90 $129.75 $3.00 $1.60 $2.90 $16.15 $20.05 2" (31) $114.25 $131.20 $3.40 $1.60 $3.40 $18.20 $20.05 2-1/2" (50) $152.75 $183.95 $3.55 $2.10 $4.20 $18.90 $21.10 3" (70) $208.75 $252.10 $4.20 $2.10 $4.20 $32.15 $21.85 Prices Operating Specifications Pressure Rating: 250 psi air maximum Temperature Rating: -20F to 200F. Note that if the magnetic piston is used, maximum temperature is derated to 185F. Fluoroelastomer seals rated for higher temperatures (up to 400F) are available. If cylinders are operated at temperatures below 0F for extended time periods, our low temperature option (N) is recommended. This option has a temperature range of -40F to 200F. If cylinders are operated below -20F with low temperature seals for extended time periods, cylinder performance will be affected by the cold temperature. *No charge options: NT Note: Pricing for fractional and non-standard stroke lengths follow the same pricing rules as our standard Original Line cylinders. (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 156 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page