Pneumatic And Hydraulic Equipment Page 152

BIMBA REPAIRABLE STAINLESS STEEL CYLINDERS Option Notes: Option (B) Bumpers and Option (FC) Cushions are not a valid combination. Option (B) Bumpers and Option (P) Prox. Switches are not a valid combination. If Option (B) and Option (V) are ordered in combination, the standard Bumper material will be used in bore sizes 5, 6, and 8". Option (M) Magnetic Piston and Option (V) High Temperature Seals should be specified for chemical compatibility requirements only. The piston magnet is nitrile based, hence the temperature rating remains at 200 degrees F. How to Order RS - 1-1/2X4 - MP2 U Bore Size 1-1/2" 2" 2-1/2" 3-1/4" 4" 5" 6" 8" Options B - Bumpers 1 FC - Fixed Cushions 5 KK3 - Female Rod Thread 2 M - Magnetic Piston 5 NT - Non-threaded Rod 5 P - Prox. Switch Both Ends 5 TW - Piston Bearing Strip 3 5 SP - 303 Stainless Steel Piston 5 U - USDA Approved Options 4 V - High Temperature Seals EE - Extra Rod Extension Stroke 4 = 4" (0-24") Mouting Styles MXO - Tapped Both Ends MXF - Tapped Front MXR - Tapped Rear MP2 - Clevis Rear MP4 - Pivot Rear 1 Bumper adds 1/4" to overall length in bores 1-1/2" to 4". Bumper adds 1/2" in bores 5" to 8". 2 Other rod ends available upon request. 3 Standard with Stainless Piston Option. 4 USDA Approved option includes an external wiper as required by the USDA. The cylinder rod length will automatically increase by the amount required to accommodate the seal retaining bracket. 5 The following options do not affect length: Fixed Cushions (FC), Magnetic Piston (M), Non-threaded Rod (NT), Proximity Switches (P), Piston Bearing Strip (TW), and 303 Stainless Steel Piston (SP). No Charge: (KK3) Female Rod Threads (NT) Non-threaded Rod Prices Piston Tapped Tapped Tapped Rear Rear Adder Bumpers Fixed Magnetic Prox Bearing 303 SS USDA High Temp Extra Bore Both Ends Front Rear Clevis Pivot per 1" Both Ends Cushions Piston Switches Strip Piston Options Seals Rod Ext. (MXO) (MXF) (MXR) (MP2) (MP4) Stroke (B) 1 (FC) 5 (M) 5 (P) 5 (TW) 3 5 (SP) 5 (U) 4 (V) (EE) 1-1/2" (17) $338.05 $321.15 $321.15 $433.60 $429.90 $10.40 $11.35 $63.00 $22.25 $252.95 $14.05 $43.05 $129.40 $37.40 $6.00/inch 2" (31) 379.55 362.70 362.70 481.50 476.35 13.85 17.90 69.20 25.90 252.95 14.85 49.15 134.10 43.30 6.00/inch 2-1/2" (50) 412.35 395.50 395.50 520.25 513.55 15.50 17.90 77.50 25.90 252.95 15.40 49.90 135.60 47.70 6.00/inch 3-1/4" (83) 520.95 504.10 504.10 638.50 630.40 17.80 24.80 84.05 46.15 252.95 16.65 63.40 153.80 89.95 8.65/inch 4" (125) 605.05 588.20 588.20 731.05 721.55 23.25 24.80 91.65 53.40 252.95 17.90 72.60 164.70 98.10 8.65/inch 5" 892.05 882.75 882.75 1066.70 1068.40 25.80 28.55 85.65 52.55 n/a 22.05 79.15 234.80 165.00 8.75/inch 6" 1072.65 1061.40 1061.40 1288.25 1296.70 37.20 32.75 85.65 53.00 n/a 24.70 112.00 331.90 174.80 8.75/inch 8" 1326.40 1315.05 1315.05 1622.25 1624.85 52.05 32.75 85.65 53.00 n/a 30.45 200.80 408.80 287.90 8.75/inch Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 152 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page