Pneumatic And Hydraulic Equipment Page 151

B I M B A REPAIRABLE STAINLESS STEEL CYLINDERS Component Description 1. Rod Guide: Corrosion resistant 303 stainless steel is ideal for washdown applications. Designed specifically to reduce sharp edges and corners and provide a smooth transition to the cylinder body eliminating catch points for contamination and to allow ease in cleaning. Tapped holes are provided to allow easy mounting of USDA approved secondary wiper retainer as an option. 2. Rod Bushing: Material is PTFE (Polytetrafluoroethylene) for extended life, larger bores (5", 6", 8") utilize an acetal bushing. 3. Rod Wiper: A Urethane rod wiper is standard (high temperature material is optional) and offers resistance to a wide variety of washdown chemicals. Larger bores offer a PTFE rod wiper as standard. 4. Rod Seal: Nitrile rod seal (high temperature material is optional) is pressure activated and wear compensating for long life. 5. Body Seal: Nitrile material is standard (high temperature material is optional). 6. Body: Thick walled 316 stainless steel offers superior corrosion resistance and is designed to minimize gaps with the mating end caps where contamination can build up. 7. Rear Head: Corrosion resistant 303 stainless steel is ideal for washdown applications. Designed specifically to reduce sharp edges and corners and provide a smooth transition to the cylinder body eliminating catch points for contamination and to allow ease in cleaning. Optional tapped holes allow for easy mounting of NFPA rear pivot or rear clevis mounting brackets. 8. Piston Rod: Ground and roller burnished 303 stainless steel for maximum corrosion resistance. 9. Piston: Precision machined from aluminum (optional bearing strip) may also be ordered in stainless steel for internal corrosion resistance when required. 10. Piston Seals: Nitrile material is standard, high temperature material is optional. Seals are pressure activated and wear compensating. 11. Lubricant: Food Grade (H1) Grease. Operating Specifications Temperature: -20F to 200F standard; 0 to 400F with V option Stroke Maximum: 24" (strokes beyond 24" require an application review) Operating Pressure: 200 psi maximum Examples of USDA Approved "U" Option Mounting Bracket Bimba JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 151 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page