Pneumatic And Hydraulic Equipment Page 148

ORIGINAL LINE ROD LOCK CYLINDER The Bimba Original Line Rod Lock Cylinder is a normally clamped unit that holds the piston rod in position when air pressure is not present. It is ideal for preventing drift at machine shut down. Engineering Specifications Operating Medium: Air Operating Pressure: 50 psi minimum (to actuate lock piston) 125 psi maximum Temperature Range: -20 to +200 degrees F Lubrication: HT-99 Cylinder body: 304 stainless steel Rod Guide, Rear Head: Aluminum Cap: Anodized aluminum Piston & Rod Seal: Buna-N Rod & Pivot Bushing: Sintered bronze Piston Rod: Hard chrome plated stainless steel Expected Service Life: 5 million cylinder actuations 1 million lock actuations Low Switch High Extra Mounting Style Add per Bumpers Temp Track Temp Extension 1" Stroke T2, T3, T4 EE Bore D DXP B N (per track) V (per inch) 3/4" (04) 129.05 135.00 2.70 5.75 2.95 4.00 18.50 1.55 1-1/16" (09) 163.05 169.20 2.95 5.75 3.25 4.00 21.90 1.55 1-1/2" (17) 210.20 217.90 4.10 6.90 5.15 4.00 24.25 2.55 2" (31) 298.35 306.65 4.80 9.60 6.85 4.30 33.55 3.25 2-1/2" (50) 372.35 392.15 5.30 9.60 8.90 4.30 33.55 3.60 3" (70) 484.40 504.75 5.30 12.35 11.85 4.30 35.45 3.60 Prices Rod Lock Holding Forces BFLM - 093 - DW Product Type BFLM-Original Line Rod Lock (Block Front and Magnet Standard) Mounting Style D - Axial Rear Port DXP - Universal Mount - (includes pivot bushing) Options B * - Double Acting Bumpers F - Molycoated Body ID N - Low Temperature Operation (-40F to +200F) Q ** - Side Port Rear Head T2, T3, T4 - Add Track for MS Series Switch V - High Temperature Operation (0F to +400F) W - Rod Wiper (standard) EE - Extra Rod Extension Standard Stroke Lenghts Refer by bore size to OL double-acting standard stroke lenghts Bore Size 04 - 3/4" 09 - 1-1/16" 17 - 1-1/2" 31 - 2" 50 - 2-1/2" 70 - 3" *Adder to overall length. Contact JHF. **Use DXP model, omit rear pivot tang. PORT: 50 PSI MIN ACTIVATES PISTON TO RELEASE CLAMP ROD LOCK PISTON PISTON CAP PISTON SEAL SPRING FLAT WASHER BUTTONHEAD CAP SCREW SEAL RETAINER ROD BUSHING ROD WIPER ROD GUIDE ROD CLAMP DOWEL PIN CAM ROD SEAL Holding Force Bore (Pounds) 3/4" (04) 40 1-1/16" (09) 90 1-1/2" (17) 170 2" (31) 310 2-1/2" (50) 500 3" (70) 700 Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 148 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page