Pneumatic And Hydraulic Equipment Page 146

THREE-POSITION ORIGINAL LINE CYLINDERS Product Type Blank - Three-position Original Line M - Magnet option for cylinders* NR - Non-rotating rod option Mounting Options D - Double acting, nose mount DXP - Double acting, universal mount Bore Sizes 02 - 9/16" 04 - 3/4" 09 - 1-1/16" 17 - 1-1/2" 31 - 2" Options (Enter in alphabetical order, except EE which is last) B - Bumpers E - Non-lube seals and lubrication F - Molycoated body G - Magnalube G K - Ports rotated 90 degrees N - Low temperature seals & lubrication NT - Non-threaded rod Q - Side ported rear head (see standard Original Line information for applicable length adders by bore size) T - Switch Track (T2, T3 or T4) V - High temperature seals & lubrication W - Rod wiper EEX.XX - Extra rod extension Bimba's Three-Position Original Line stainless steel body cylinder provides three positions with a single cylinder. Bimba offers the performance and quality of the unitized Original Line cylinder design along with its product breadth now in three positive stroke positions. How to Order The model number for all Three-Position Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. Please refer to the charts below for an example of model number M-043/4.5-DW. This is a 3/4" bore, with a 3" stroke for position A, plus an additional 4-1/2" stroke for position B, double acting cylinder with a rod wiper. Specifications Expected life: 1400 miles when lubricated Total stroke tolerance: 9/16" - 1-1/2" +.075/-.040 2": +.095/-.060 Operating Medium: Air only Maximum Operating Pressure: 250 psi Temperature Range: -20F to 200F Standard Lubrication: HT-99 Endcaps, center section, and piston material: Aluminum Cylinder body: 304 stainless steel Piston and rod seals: Buna N "U" cups Rod and pivot bushings: Sintered bronze Piston rod: 303 stainless steel M - 043 / 4.5 - D W Stroke A Stroke B Standard Stroke Lengths and Stroke Maximums 0.5 = 1/2" Nose Mount 1 = 1" 1 = 1" 1" increments to 12" 1.5 = 1-1/2" 2.5 = 2-1/2" 2 x Stroke A + Stroke B Maximum = 12" 3.75 = 3-3/4" etc. 3.75 = 3-3/4" etc. Universal Mount 1" increments to 24" 2 x Stroke A + Stroke B Maximum = 32" *Magnet located on stroke B piston only. Bimba (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 146 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page