Pneumatic And Hydraulic Equipment Page 1188

Tube 1/4 3/8 1/2 5/8 3/4 O.D. Thread 7/16-24 17/32-24 11/16-20 13/16-18 1/18 Size-B Typical Application Air brake systems. Pressure Maximum operating pressure of 150 psi. Vibration Fair resistance. Temperature Range -65F to +250F with copper tubing. Material CA360 Brass. Used With Copper tubing in air brake systems. Advantages Easy to assemble (no flaring). May be used with nylon tubing by replacing long nut and spherical sleeve with insert, rigid sleeve and nut. Conformance Meets specifications and standards of SAE and DOT. To order complete assembly with pipe sealant (Seal-A-Thread), add suffix "Z" to catalog number. Example: 1368X4Z (special order only) . Assembly Instructions 1. Cut tubing to desired length. Make sure all burrs are removed and the ends are cut square. 2. Slide nut and then sleeve on tubing. Threaded end of nut "A" must face toward fitting body. 3. Insert tubing into fitting. Be sure tub- ing is bottomed on fitting shoulder. 4. Thread nut onto fitting body until it is hand tight. 5. From that point, tighten with a wrench the number of turns indicated in the chart below: Additional Number Tube of Turns Size From Hand Tight 1/4, 3/8 1-3/4 1/2, 5/8, 3/4 3-1/4 Label Set: FS-800 (adhesive) CL-491 (non-adhesive) AIR BRAKE - COPPER TUBING BRASS FITTINGS TUBE PART O.D. NUMBER PRICE D F L 1/4 1360X4 $0.39 .255 .322 .250 3/8 1360X6 $0.39 .382 .461 .313 1/2 1360X8 $0.63 .507 .594 .375 5/8 1360X10 $1.01 .632 .734 .438 3/4 1360X12 $1.79 .758 .874 .500 SLEEVE (Ref. SAE No. 120115) TUBE PART O.D. NUMBER PRICE HEX D L 1/4 1361X4 $1.44 9/16 .256 .75 3/8 1361X6 $1.70 5/8 .384 1.13 1/2 1361X8 $3.32 13/16 .509 1.25 5/8 1361X10 $4.44 15/16 .634 1.38 3/4 1361X12 $8.25 1-1/8 .760 1.56 NUT (Ref. SAE No. 120111) UNION (Ref. SAE No. 120101BA) FEMALE TUBE PIPE PART O.D. THREAD NUMBER PRICE HEX D L 3/8 1/4 1366X6 $7.24 11/16 .312 1.19 3/8 3/8 1366X6X6 $10.11 7/8 .312 1.19 FEMALE CONNECTOR (Ref. SAE No. 120103BA) TUBE PART O.D. NUMBER PRICE HEX 1/4 1362X4 $5.14 7/16 3/8 1362X6 $7.07 9/16 1/2 1362X8 $13.53 11/16 5/8 1362X10 $19.39 13/16 3/4 1362X12 $33.47 1 1362X16 $90.31 1-1/4 1 MTO-Made To Order-Minimum Quantity Required-Contact JHF Weatherhead Eaton Weatherhead hose and fittings (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 1188 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page