Pneumatic And Hydraulic Equipment Page 1185

Tube 1/4 3/8 1/2 5/8 3/4 O.D. Thread 7/16-24 17/32-24 11/16-20 13/16-18 1-18 Size-B * Typical Application Air brake systems except where temperatures exceed +200F or where battery acid can drip on tubing. Pressure Maximum operating pressure of 150 psi. * Vibration Fair resistance. * Temperature Range -40F to +200F. Material CA360 Brass. Used With NT100 Nylon Tubing - SAE J844 Type A and B. Advantages Easy to assemble (no tube preparation or flaring required.) Built in tube support. May be used with copper tubing by replacing nut, sleeve and insert with long nut and spherical sleeve. Insert should be removed for copper tubing use. Conformance Meets specifications and standards of SAE and DOT FMVSS 571.106. Assembly Instructions 1. Cut tubing to desired length. 2. Slide nut and then sleeve on tubing. Threaded end of nut "A" must face toward fitting body. 3. Insert tubing into the preassembled fitting. Be sure tubing is bottomed in fitting. 4. Tighten nut to required torque as indicated on chart. Another check on proper assembly is dimension A also noted on chart. A gauge ring also assures installation to specification. Tube A Size Torque Dimension 1/4 85 to 115 in. lbs. .085/.105 3/8 12 to 17 ft. lbs. .125/.145 1/2 25 to 33 ft. lbs. .100/.120 5/8 26 to 35 ft. lbs. .115/.135 3/4 38 to 50 ft. lbs. .180/.200 Disassembly: Remove nut and pull tubing out of fitting body. Insert will remain in tubing. Reassembly: Push tubing and insert into fitting body until it bottoms. Thread nut only fitting body and torque as in Step 4. Label Set: FS-900 (adhesive) CL-16-3 (non-adhesive) SLEEVE (Ref. SAE No. 100115) TUBE PART O.D. NUMBER PRICE HEX 1/4 1461X4 $1.01 9/16 3/8 1461X6 $1.55 5/8 1/2 1461X8 $2.94 13/16 5/8 1461X10 $3.60 14/16 3/4 1461X12 $5.76 1-1/8 TUBE PART O.D. NUMBER PRICE 1/4 1460X4 $0.39 3/8 1460X6 $0.40 1/2 1460X8 $0.71 5/8 1460X10 $1.24 3/4 1460X12 $2.03 NUT (Ref. SAE No. 100110) AIR BRAKE - NYLON TUBING BRASS FITTINGS Weatherhead W E A T H E R H E A D Eaton Weatherhead hose and fittings JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 1185 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page