Pneumatic And Hydraulic Equipment Page 1068

A SERIES-SIDE FLUSH AND LUG MOUNTINGDIMENSIONS 1-1/8" THRU 6" BORES MOUNTING INFORMATION Side Mounted Cylinders (styles SL, CL, FB, SF) used under shock conditions or at high pressure ranges, should be doweled or keyed to the machine. Cylinders should be pinned or keyed on one end only (especially important on long strokes) due to deflection that takes place under load. Lugs on styles SL and CL are sized to allow pinning thru the lug. On style FB two pins and one bolt can be used on one end to take the thrust. On style SF keys should be welded (or bolted and pinned) to the machine member to take the thrust. Intermediate Supports are very important for the long stroke cylinders (over 72") and are available at a nominal charge. Consult John Henry Foster Co. for recommendations. BORE 1-1/8 1-1/2 2 2-1/2 3-1/4 4 5 6 AB* 5/16 3/8 1/2 5/8 3/4 AH 1-1/16 1-3/16 1-7/16 1-5/8 1-15/16 2-1/4 2-3/4 3-1/4 AJ 1-1/8 1-1/4 1-3/4 2-1/4 2-3/4 3-1/2 4-1/4 5-1/4 AL 1 1-1/4 1-1/4 1-3/8 1-3/8 AO 3/8 1/2 5/8 AT 1/8 3/16 E 1-3/4 2 2-1/2 3 3-3/4 4-1/2 5-1/2 6-1/2 EE NPTF 1/4 3/8 1/2 3/4 F 3/8 5/8 3/4 G 1-3/32 1-15/32 1-3/8 1-3/8 1-5/8 1-5/8 1-5/8 1-7/8 J 27/32 31/32 7/8 1-1/8 1-1/8 1-1/8 1-3/8 K 7/32 1/4 5/16 7/16 MM 1/2 5/8 1 1-3/8 NT 5/16-18 1/4-20 5/16-18 3/8-16 1/2-13 1/2-13 5/8-11 3/4-10 SB* 5/16 3/8 1/2 3/4 ST 1/2 3/4 1 SU 15/16 15/16 15/16 15/16 1-1/4 1-1/4 1-9/16 1-9/16 SW 3/8 1/2 11/16 11/16 TN 5/8 7/8 1-1/4 1-1/2 2-1/16 2-11/16 3-1/4 TS 2-1/2 2-3/4 3-1/4 3-3/4 4-3/4 5-1/2 6-7/8 7-7/8 US 3-1/4 3-1/2 4 4-1/2 5-3/4 6-1/2 8-1/4 9-1/4 THESE DIMENSIONS** AFFECTED BY ROD SIZE BORE 1-1/8 1-1/2 2 2-1/2 3-1/4 4 5 6 XS 1-3/8 1-3/8 1-3/8 1-3/8 1-7/8 1-7/8 2-1/16 2-5/16 XT 1-25/32 1-15/16 1-15/16 1-15/16 2-7/16 2-7/16 2-7/16 2-13/16 Y 1-23/32 1-15/16 1-15/16 1-15/16 2-7/16 2-7/16 2-7/16 2-13/16 THESE DIMENSIONS** AFFECTED BY ROD SIZE AND STROKE BORE 1-1/8 1-1/2 2 2-1/2 3-1/4 4 5 6 XA 5-3/8 5-5/8 5-5/8 5-3/4 6-7/8 6-7/8 7-1/4 8 ZA 5-3/4 6 6-1/8 7-3/8 7-3/8 7-7/8 8-5/8 ZB 4-19/32 4-27/32 4-7/8 5 5-15/16 5-15/16 6-5/16 7-1/16 THESE DIMENSIONS AFFECTED BY STROKE BORE 1-1/8 1-1/2 2 2-1/2 3-1/4 4 5 6 LB 3-3/4 4 4-1/8 4-7/8 4-7/8 5-1/8 5-3/4 P 2-3/16 2-1/4 2-1/4 2-3/8 2-5/8 2-5/8 2-7/8 3-1/8 SA 5-3/4 6 6-1/8 7-3/8 7-3/8 7-7/8 8-1/2 SN 2-1/16 2-1/4 2-1/4 2-3/8 2-5/8 2-5/8 2-7/8 3-1/8 SS 2-5/8 2-7/8 2-7/8 3 3-1/4 3-1/4 3-1/8 3-5/8 *Clearance hole for indicated bolt size. **Dimensions shown are for standard rod size only. For oversize and 2:1 rods, add N dimension shown on rod end chart. Two mounting holes on center line. THREAD DEPTH AND SIDE FLUSH MOUNTING AVAILABILITY BORE ROD DIAMETER THREAD DEPTH 1-1/8 1/2 3/8 5/8 3/8 1 5/16 2 5/8, 1, 1-3/8 7/16 5/8, 1, 1-3/8 5/8 1-3/4 7/16 1, 1-3/8, 1-3/4 3/4 2 1/2 1, 1-3/8, 1-3/4, 2 3/4 2-1/2 11/16 1, 1-3/8, 1-3/4, 2, 2-1/2 1-1/4 3 15/16 3-1/2 3/4 1-3/8, 1-3/4, 2, 2-1/2, 3, 3-1/2 1-1/8 4 1 Note: Side flush mounting is available with usable thread depths shown above. 1-1/2 3-1/4 2-1/2 4 5 6 Sheffer cylinders (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 1068 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page