Pneumatic And Hydraulic Equipment Page 1056

MH SERIES-TIE ROD AND DOUBLE ROD MOUNTINGDIMENSIONS DOUBLE ROD END CYLINDERS Double Rod End cylinders are specified for many reasons, some of which are as follows: 1. A simultaneous push and pull requirement. 2. Both rod ends are fixed and the cylinder moves - such as on a machine slide. 3. One rod does the work and the other serves to indicate position or to trip switches. 4. A double rod end cylinder has rod bearings at each end and therefore offers more resistance to deflection and side loading. When the rod ends of a double rod end cylinder are not to be the same, such as a style 2 on one end and a style 4 on the other, be sure to so specify and to identify which end is which in relation to the mount. For example, on a Front Head Flange mount double rod end cylinder, specify style 2 rod end on flange end of cylinder and style 4 on opposite end. ROD BORE DIA. FA RD VB W WF Y ZB* ZL* ZM* ZT* 1-1/8 5/8 STD. - - - 5/8 1-1/8 1-23/32 4-5/8* 5-1/4* 5-5/8* 5-3/8* 5/8 STD. - - - 5/8 1 1-15/16 4-27/32* 5-23/32* 6-1/8* 5-5/8* 1 - - - 1 1-3/8 2-5/16 5-7/32* 6-3/32* 6-7/8* 6* 5/8 STD. - - - 5/8 1 1-15/16 4-7/8* 5-3/4* 6-1/8* 5-3/4* 1 - - - 1 1-3/8 2-5/16 5-1/4* 6-1/8* 6-7/8* 6-1/8* 1-3/8 - - - 1-1/4 1-5/8 2-9/16 5-1/2* 6-3/8* 7-3/8* 6-3/8* 5/8 STD. 11/32 2.187 5/8 - 1 1-15/16 5* 5-7/8* 6-1/4* 5-7/8* 1 11/32 2.375 7/8 - 1-3/8 2-5/16 5-3/8* 6-1/4* 7* 6-1/4* 1-3/8 - - - 1-1/4 1-5/8 2-9/16 5-5/8* 6-1/2* 7-1/2* 6-1/2* 1-3/4 - - - 1-3/8 1-7/8 2-13/16 5-7/8* 6-3/4* 8* 6-3/4* 1 STD. 11/32 2.375 7/8 - 1-3/8 2-7/16 5-15/16* 7-1/16* 7-1/2* 7* 1-3/8 19/32 2.875 1 - 1-5/8 2-11/16 6-3/16* 7-5/16* 8* 7-1/4* 1-3/4 19/32 3.250 1-1/8 - 1-7/8 2-15/16 6-7/16* 7-9/16* 8-1/2* 7-1/2* 2 - - - 1-3/8 2 3-1/16 6-9/16* 7-11/16* 8-3/4* 7-5/8* 1 STD. 11/32 2.375 7/8 - 1-3/8 2-7/16 5-15/16* 7-1/16* 7-1/2* 7* 1-3/8 19/32 2.875 1 - 1-5/8 2-11/16 6-3/16* 7-5/16* 8* 7-1/4* 1-3/4 19/32 3.250 1-1/8 - 1-7/8 2-15/16 6-7/16* 7-9/16* 8-1/2* 7-1/2* 2 19/32 3.562 1-1/8 - 2 3-1/16 6-9/16* 7-11/16* 8-3/4* 7-5/8* 2-1/2 19/32 4.000 1-1/4 - 2-1/4 3-5/16 6-13/16* 7-15/16* 9-1/4* 7-7/8* 1 STD. 11/32 2.375 7/8 - 1-3/8 2-7/16 6-5/16* 7-7/16* 7-3/4* 7-11/16* 1-3/8 19/32 2.875 1 - 1-5/8 2-11/16 6-9/16* 7-11/16* 8-1/4* 7-15/16* 1-3/4 19/32 3.250 1-1/8 - 1-7/8 2-15/16 6-13/16* 7-15/16* 8-3/4* 8-3/16* 2 19/32 3.562 1-1/8 - 2 3-1/16 6-15/16* 8-1/16* 9* 8-5/16* 2-1/2 19/32 4.000 1-1/4 - 2-1/4 3-5/16 7-3/16* 8-5/16* 9-1/2* 8-7/16* 3 19/32 4.750 1-1/4 - 2-1/4 3-5/16 7-3/16* 8-5/16* 9-1/2* 8-7/16* 3-1/2 23/32 5.187 1-1/4 - 2-1/4 3-5/16 7-3/16* 8-5/16* 9-1/2* 8-7/16* 1-3/8 STD. 19/32 2.875 1 - 1-5/8 2-13/16 7-1/16* 8-5/16* 8-3/4* 8-7/16* 1-3/4 19/32 3.250 1-1/8 - 1-7/8 3-1/16 7-5/16* 8-9/16* 9-1/4* 8-11/16* 2 19/32 3.562 1-1/8 - 2 3-3/16 7-7/16* 8-11/16* 9-1/2* 8-13/16* 2-1/2 19/32 4.000 1-1/4 - 2-1/4 3-7/16 7-11/16* 8-15/16* 10* 8-15/16* 3 19/32 4.750 1-1/4 - 2-1/4 3-7/16 7-11/16* 8-15/16* 10* 8-15/16* 3-1/2 23/32 5.187 1-1/4 - 2-1/4 3-7/16 7-11/16* 8-15/16* 10* 8-15/16* 4 23/32 5.750 1-1/4 - 2-1/4 3-7/16 7-11/16* 8-15/16* 10* 8-15/16* 1-3/8 STD. 19/32 2.875 1 - 1-5/8 2-13/16 7-5/16* 7-13/16* 8-7/8* 9-1/16* 1-3/4 19/32 3.250 1-1/8 - 1-7/8 3-1/16 7-9/16* 8-1/16* 9-3/8* 9-5/16* 2 19/32 3.562 1-1/8 - 2 3-3/16 7-11/16* 8-3/16* 9-5/8* 9-7/16* 2-1/2 19/32 4.000 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 3 19/32 4.750 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 3-1/2 23/32 5.187 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 4 23/32 5.750 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 4-1/2 3/4 6.250 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 5 3/4 6.750 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 1-3/8 STD. 19/32 2.875 1 - 1-5/8 2-13/16 7-5/16* 7-13/16* 8-7/8* 9-1/16* 1-3/4 19/32 3.250 1-1/8 - 1-7/8 3-1/16 7-9/16* 8-1/16* 9-3/8* 9-5/16* 2 19/32 3.562 1-1/8 - 2 3-3/16 7-11/16* 8-3/16* 9-5/8* 9-7/16* 2-1/2 19/32 4.000 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 3 19/32 4.750 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 3-1/2 23/32 5.187 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 4 23/32 5.750 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 4-1/2 3/4 6.250 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 5 3/4 6.750 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* 5-1/2 3/4 7.250 1-1/4 - 2-1/4 3-7/16 7-15/16* 8-7/16* 10-1/8* 9-11/16* *Add stroke to these dimensions. Add 2X stroke to ZM dimensions. TIE ROD AND DOUBLE ROD DIMENSIONS 1-1/8" THRU 8" BORES EE BORE AA BB DD E NPT SAE FF G J K LB* LD* P* R 1-1/8 1.68 1 1/4-28 1-3/4 1/4 -6 1/2 1-1/8 1 1/4 3-1/4* 3-3/8* 2-3/16* 1.19 1-1/2 2.02 1 1/4-28 2 3/8 -6 3/8 1-1/2 1 7/32 3-5/8* 4-1/8* 2-1/4* 1.43 2 2.6 1-1/8 5/16-24 2-1/2 3/8 -6 3/8 1-1/2 1 1/4 3-5/8* 4-1/8* 2-1/4* 1.84 2-1/2 3.1 1-1/8 5/16-24 3 3/8 -6 3/8 1-1/2 1 1/4 3-3/4* 4-1/4** 2-3/8* 2.19 3-1/4 3.93 1-3/8 3/8-24 3-3/4 1/2 -10 5/8 1-3/4 1-1/4 5/16 4-1/4* 4-3/4* 2-5/8* 2.76 4 4.7 1-3/8 3/8-24 4-1/2 1/2 -10 - 1-3/4 1-1/4 5/16 4-1/4* 4-3/4* 2-5/8* 3.32 5 5.8 1-13/16 1/2-20 5-1/2 1/2 -10 - 1-3/4 1-1/4 7/16 4-1/2* 5* 2-7/8* 4.10 6 6.9 1-13/16 1/2-20 6-1/2 3/4 -12 - 2 1-1/2 7/16 5* 5-1/2* 3-1/8* 4.88 7 8.1 2-5/16 5/8-18 7-1/2 3/4 -12 - 2 1-1/2 9/16 5-1/8* 5-5/8* 3-1/4* 5.73 8 9.1 2-5/16 5/8-18 8-1/2 3/4 -12 - 2 1-1/2 9/16 5-1/8* 5-5/8* 3-1/4* 6.44 Alternate port at no extra charge. SAE port is standard. *Add stroke to these dimensions. 1-1/2 2 2-1/2 3-1/4 4 5 6 7 8 IMPORTANT - CONSTRUCTION VARIANCES For information on construction variance on Tie Rods Extended Mounts and Double Rod End Cylinders refer to front of MH Section. Sheffer cylinders (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 1056 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page