Pneumatic And Hydraulic Equipment Page 1034

HH SERIES-CLEVIS, SIDE FLUSH AND FOOT BRACKET MOUNTINGDIMENSIONS SIDE FLUSH MOUNT Available 1-1/2" through 8" bore sizes only. Some bore and rod combinations are not available in this mount. See Side Flush Thread Depth on adjacent chart. NA means not available. The 1 1 / 8 " bore has only one tapped hole in the head and in the cap. FOOT BRACKET MOUNT Available 1-1/2" through 8" bore sizes only. This style of mount is not recom- mended for pressures in excess of 1000 psi or strokes over 36 inches. Consider the use of an End Lug mount or a Side Lug mount shown on Page HH-12. Selection of Piston Rod Diameter can be determined by consulting separate Engineering Section. See Engineering Section for long stroke cylinder data. CAUTION Refer to separate Accessories Section for important information concerning the mounting of cylinders. SIDE MM FLUSH ROD THREAD BORE DIA. SA* WF XA XC* XT Y ZA* ZB* ZC* DEPTH 1-1/8 5/8 STD. 5-3/4* 1-1/8 5-3/8 5-5/16* 1-25/32 1-23/32 5-3/4* 4-5/8* 5-11/16* 3/8 5/8 STD. 7* 1 6-5/8 6-3/8* 2 2 7* 5-15/16* 6-7/8* 7/16 1 2:1 7* 1-3/8 7 6-3/4* 2-3/8 2-3/8 7-3/8* 6-5/16* 7-1/4* 7/16 1STD. 7-3/4* 1-3/8 7-1/4 7-1/4* 2-3/8 2-3/8 7-3/4* 6-7/16* 8* 7/16 1-3/8 2:1 7-3/4* 1-5/8 7-1/2 7-1/2* 2-5/8 2-5/8 8* 6-11/16* 8-1/4* 7/16 1STD. 7-1/8* 1-3/8 7-5/16 7-3/8* 2-3/8 2-3/8 7-7/8* 6-9/16* 8-1/8* 3/4 1-3/8 7-3/4* 1-5/8 7-9/16 7-5/8* 2-5/8 2-5/8 8-1/8* 6-13/16* 8-3/8* 3/4 1-3/4 2:1 7-3/4* 1-7/8 7-13/16 7-7/8* 2-7/8 2-7/8 8-3/8* 7-1/16* 8-5/8* N.A. 1-3/8 9-1/8* 1-5/8 8-15/16 8-5/8* 2-3/4 2-3/4 9-5/8* 7-11/16* 9-5/8* 1 1-3/4 9-1/8* 1-7/8 9-3/16 8-7/8* 3 3 9-7/8* 7-15/16* 9-7/8* 7/8 2 2:1 9-7/8* 2 9-5/16 9* 3-1/8 3-1/8 10* 8-1/16* 10* 3/4 1-3/4 STD. 10* 1-7/8 9-3/4 9-3/4* 3 3 10-5/8* 8-3/16* 11-1/8* 1-1/8 2 10* 2 9-7/8 9-7/8* 3-1/8 3-1/8 10-3/4* 8-5/16* 11-1/4* 1 2-1/2 2:1 10* 2-1/4 10-1/8 10-1/8* 3-3/8 3-3/8 11* 8-9/16* 11-1/2* N.A. 2STD. 10-1/2* 2 10-3/8 10-1/2* 3-1/8 3-1/8 11-1/4* 9* 12-1/4* 1-3/8 2-1/2 10-1/2* 2-1/4 10-5/8 10-3/4* 3-3/8 3-3/8 11-1/2* 9-1/4* 12-1/2* 1-3/8 3 10-1/2* 2-1/4 10-5/8 10-3/4* 3-3/8 3-3/8 11-1/2* 9-1/4* 12-1/2* 1-1/4 3-1/2 2:1 10-1/2* 2-1/4 10-5/8 10-3/4* 3-3/8 3-3/8 11-1/2* 9-1/4* 12-1/2* 1 2-1/2STD. 12-1/4* 2-1/4 12-1/16 12-1/8* 3-1/2 3-1/2 13-1/8* 10-1/2* 14-1/8* 1-3/4 3 12-1/4* 2-1/4 12-1/16 12-1/8* 3-1/2 3-1/2 13-1/8* 10-1/2* 14-1/8* 1-3/4 3-1/2 12-1/4* 2-1/4 12-1/16 12-1/8* 3-1/2 3-1/2 13-1/8* 10-1/2* 14-1/8* 1-1/2 4 2:1 12-1/4* 2-1/4 12-1/16 12-1/8* 3-1/2 3-1/2 13-1/8* 10-1/2* 14-1/8* 1-1/8 3STD. 14-7/8* 2-1/4 13-15/16 13-3/4* 3-13/16 3-13/16 15-1/4* 11-15/16* 16-1/4* 2 3-1/2 14-7/8* 2-1/4 13-15/16 13-3/4* 3-13/16 3-13/16 15-1/4* 11-15/16* 16-1/4* 2 4 14-7/8* 2-1/4 13-15/16 13-3/4* 3-13/16 3-13/16 15-1/4* 11-15/16* 16-1/4* 1-5/8 4-1/2 14-7/8* 2-1/4 13-15/16 13-3/4* 3-13/16 3-13/16 15-1/4* 11-15/16* 16-1/4* 1-1/4 5 2:1 14-7/8* 2-1/4 13-15/16 13-3/4* 3-13/16 3-13/16 16-1/4* 11-15/16* 16-1/4* N.A. 3-1/2STD. 15-7/8* 2-1/4 14-15/16 15* 3-15/16 3-15/16 16-1/4* 13* 17-3/4* 2-1/4 4 15-7/8* 2-1/4 14-15/16 15* 3-15/16 3-15/16 16-1/4* 13* 17-3/4* 1-3/4 4-1/2 15-7/8* 2-1/4 14-15/16 15* 3-15/16 3-15/16 16-1/4* 13* 17-3/4* 1-3/4 5 15-7/8* 2-1/4 14-15/16 15* 3-15/16 3-15/16 16-1/4* 13* 17-3/4* 1-5/8 5-1/2 2:1 15-7/8* 2-1/4 14-15/16 15* 3-15/16 3-15/16 16-1/4* 13* 17-3/4* 1-1/2 4-1/2STD. - 2-15/16 - 19-1/16* - 5 - - 22-9/16* - 5 - 3-3/16 - 19-5/16* - 5-1/4 - - 22-13/16* - 5-1/2 - 3-3/16 - 19-5/16* - 5-1/4 - - 22-13/16* - 7 2:1 - 3-11/16 - 19-13/16* - 5-3/4 - - 23-5/16* - 5-1/2STD. - 3-3/16 - 22-3/16* - 5-3/4 - - 26-3/16* - 7 - 3-13/16 - 22-13/16* - 6-3/8 - - 26-13/16* - 8 2:1 - 4-3/8 - 23-3/8* - 6-15/16 - - 27-3/8* - 7 STD. - 4-5/16 - 27-13/16* - 7-7/16 - - 32-13/16* - 10 2:1 - 4-15/16 - 28-7/16* - 8-1/16 - - 33-7/16* - * Be sure to add stroke to this dimension. CLEVIS, SIDE FLUSH AND FOOT BRACKET DIMENSIONS EE EE BORE AB** AH AJ AL AO AT CB CD CL CW E NPT SAE FF G J K L LB 1-1/8 5/16 1-1/16 1-1/8 1 3/8 1/8 5/8 3/8 1-1/4 5/16 1-3/4 1/4 -6 1/2 1-1/8 1 1/4 15/16 3-1/4 1-1/2 3/8 1-3/8 3/4 1 3/8 1/8 3/4 1/2 1-3/4 1/2 2-1/2 1/2 -10 3/8 1-3/4 1-1/2 5/16 3/4 4-5/8 2 1/2 1-11/16 2 1-1/4 1/2 1/8 1-1/4 3/4 2-1/2 5/8 3 1/2 -10 5/8 1-3/4 1-1/2 7/16 1-1/4 4-5/8 2-1/2 5/8 1-15/16 2-3/8 1-3/16 9/16 1/8 1-1/4 3/4 2-1/2 5/8 3-1/2 1/2 -10 5/8 1-3/4 1-1/2 7/16 1-1/4 4-3/4 3-1/4 3/4 2-9/16 3-1/8 1-13/16 11/16 1/4 1-1/2 1 3 3/4 4-1/2 3/4 -12 3/4 2 1-3/4 9/16 1-1/2 5-1/2 4 1 2-13/16 3-1/4 2-1/8 7/8 1/4 2 1-3/8 4 1 5 3/4 -12 - 2 1-3/4 9/16 2-1/8 5-3/4 5 1 3-11/16 4-3/4 2-1/8 7/8 5/16 2-1/2 1-3/4 5 1-1/4 6-1/2 3/4 -12 - 2 1-3/4 3/4 2-1/4 6-1/4 6 1-1/4 4-1/4 5-3/8 2-7/16 1-1/16 3/8 2-1/2 2 5 1-1/4 7-1/2 1 -16 - 2-3/8 2-3/8 7/8 2-1/2 7-3/8 7 1-1/2 4-15/16 5-7/8 3-3/16 1-5/16 1/2 3 2-1/2 6 1-1/2 8-1/2 1-1/4 -20 - 2-7/8 2-7/8 1-3/16 3 8-1/2 8 1-1/2 5-1/2 6-7/8 3-3/16 1-5/16 1/2 3 3 6 1-1/2 9-1/2 1-1/2 -24 - 3-1/4 3-1/4 1-1/4 3-1/4 9-1/2 10 - - - - - - 4 3-1/2 8 2 12-5/8 2 -32 - 3-7/8 3-7/8 1-11/16 4 12-1/8 12 - - - - - - 4-1/2 4 9 2-1/4 14-7/8 2-1/2 -32 - 4-7/8 4-7/8 1-15/16 4-1/2 14-1/2 14 - - - - - - 6 5 12 3 17-1/4 2-1/2 -32 - 5-3/8 5-3/8 2-5/32 6-1/2 17 * Be sure to add stroke to this dimension. **Clearance holes for indicated bolt size. Alternate port at no extra charge. SAE port is standard. 1 / 2 1 / 2 3 1 / 4 5 6 7 8 10 1 2 14 LR MR NT P* SN* TN 9/16 3/8 5/16-18 2-3/16* 2-1/16* - 1/2 1/2 3/8-16 2-7/8* 2-7/8* 3/4 3/4 3/4 1/2-13 2-7/8* 2-7/8* 15/16 3/4 3/4 5/8-11 3* 3* 1-5/16 1 1 3/4-10 3-1/2* 3-1/2* 1-1/2 1-3/8 1-3/8 1-8 3-3/4* 3-3/4* 2-1/16 1-3/4 1-3/4 1-8 4-1/4* 4-1/4* 2-15/16 2 2 1-1/4-7 4-7/8* 5-1/8* 3-5/16 2-1/2 2-1/2 1-1/2-6 5-3/8* 5-7/8* 3-3/4 2-3/4 2-3/4 1-1/2-6 6-1/8* 6-5/8* 4-1/4 3-1/2 3-1/2 - 8* - - 4 4 - 9-3/8* - - 5 5 - 10-3/4* - - Sheffer cylinders (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com JHF Catalog [ Volume 7 ] 1034 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page