Pneumatic And Hydraulic Equipment Page 1033

HH SERIES-CLEVIS, SIDE FLUSH AND FOOT BRACKET MOUNTINGS E E-.003 2-.008 E K Y WF XT NT TN SN + STROKE MM ROD DIA. EE P + STROKE ZB + STROKE AVAILABLE 1-1/8" THRU 8" BORE ONLY E CW CD LR CB K Y WF G J L MR CL LB + STROKE XC + STROKE MM ROD DIA. EE P + STROKE ZC + STROKE PIVOT MOUNT IS AVAILABLE PIVOT WIDTH IS SAME AS CB E K AJ AT AO AO AL J MM ROD DIA. AH G Y WF EE P + STROKE ZA + STROKE AVAILABLE 1-1/8" THRU 8" BORE ONLY XA + STROKE LB + STROKE SA + STROKE AB BOLT SIZE (6 HOLES) 4 HOLES ON 1 / 8 " BORE CLEVIS MOUNT STYLE C (MP1)* SIDE FLUSH MOUNT STYLE SF (MS4)* 1000 PSI FOOT BRACKET MOUNT STYLE FB (MS1)* WF AL G FF K AO XT DRAWING A DRAWING B *ANSI/B93.1-1964 Mounting Style Designation. C MOUNT - The round gland retainer shown above is not used on the 1-1/8", 1-1/2", 2" bores, the 2-1/2" bore with a 1-3/8" or 1-3/4" rod diameter, or the 3-1/4" bore with a 2" diameter rod. A square retainer, the same size as the head, is employed on these sizes. The square retainer is held in place with tie rod nuts and the rod gland cannot be removed without loosening the tie rods. The retainer thickness is shown on adjacent Drawing A. SF MOUNT - The round gland retainer is not used on the 1-1/8" bore, 1-1/2" bore, or the 2-1/2" bore with a 1-3/4" rod diameter and the 3-1/4" bore with a 2" rod diameter. As in the C mount, a square retainer is employed but it is held in place with retainer screws that thread into the head and the rod gland can be removed without loosening the tie rods. See adjacent Drawing A. FB MOUNT - The square retainer is used on 1-1/8" bore, 1-1/2" bore, 2" bore, 2-1/2" bore with 1-3/8" and 1-3/4" rod diameters, and 3-1/4" bore with a 2" rod diameter. The retainer is held in place with retainer screws that thread into the head. The rod gland can be removed without loosening the tie rods, but the front bracket must also be removed. See adjacent Drawing B. IMPORTANT NOTICE S H E F E R Sheffer cylinders JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 1033 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page