Pneumatic And Hydraulic Equipment Page 1029

HH SERIES-LUG MOUNTINGS SIDE LUG MOUNT STYLE SL (MS2)* CENTER LINE LUG MOUNT STYLE CL (MS3)* END LUG MOUNT STYLE EL (MS7)* Available 1 1 / 8 " thru 8" Bore only US E TS SW ST E K SW SU XS SU WF Y ZB + STROKE P + STROKE EE SS + STROKE MM ROD DIA. SW E-.003 2-.008 SB BOLT SIZE US E TS SW ST SW SU XS WF Y SU SW K MM ROD DIA. ZB + STROKE P + STROKE EE SS + STROKE SB BOLT SIZE SL and CL MOUNTS - The round gland retainer shown above is not used on the 1-1/8" bore, 1-1/2" bore, or the 2-1/2" bore with a 1-3/4" rod diameter and the 3-1/4" bore with a 2" rod diameter. A square retainer, the same square size as the head is employed on these sizes. The retainer is held in place with retainer screws that thread into the head. The rod gland can be removed without loosening the tie rods in all sizes. See adjacent Drawing A. EL MOUNT - The round gland retainer shown above is not used on the 1-1/8" bore, 1-1/2" bore, 2" bore, the 2-1/2" bore with 1-3/8" and 1-3/4" rod diameters, and the 3-1/4" bore with a 2" rod diameter. A square retainer, the same square size as the head, is employed on these sizes. The lugs serve as nuts on the bottom two tie rods, and the top two tie rods use tie rod nuts. The rod gland cannot be removed without loosening the tie rods in these sizes. See adjacent Drawing B. IMPORTANT NOTICE E EB BOLT SIZE ET R EO EX G WF K J EO EL SE + STROKE EE P + STROKE XE+ STROKE MM ROD DIA. E-.003 2-.008 E DRAWING A DRAWING B *ANSI/B93.1-1964 Mounting Style Designation. WF FF EX EO XS FF WF S H E F E R Sheffer cylinders JHF Catalog [ Volume 7 ] (314) 427-0600 800-444-0522 (FAX) 314-427-3502 www. j hf.com 1029 Prices Subject to Change Without Notice John Henry Foster pneumatic and hydraulic equipment

Previous Page
Next Page